sawmill5.jpg
dogthecfarm
sawmill4.jpg
log stopthecfarm
sawmill3.jpg
bunk removedthecfarm
sawmill1.jpg
boat winch to raise headthecfarm
sawmill2.jpg
bunks and railthecfarm
sawmill10.jpg
removable bunk side viewthecfarm
sawmill9.jpg
sawmill head-20hp Hondathecfarm
sawmill8.jpg
end of bunk,with log stop and dogthecfarm
sawmill7.jpg
log stop and dogthecfarm
sawmill6.jpg
log dogthecfarm
sawmill14.jpg
boat winchthecfarm
sawmill13.jpg
boat winchthecfarm
sawmill12.jpg
saw headthecfarm
sawmill11.jpg
boat winchthecfarm
saw1.jpg
thecfarm
logdog3thecfarm.jpg
bandsaw headthecfarm
logdog2thecfarm.jpg
logstop and band wheelthecfarm
log dog1thecfarm.jpg
logdog and band wheelthecfarm
adjustmentthecfarm.jpg
adjustment for bladethecfarm
logdog4thecfarm.jpg
log dog and band wheelthecfarm
thecfarm2012sawmill.jpg
thecfarm2012sawmillthomas sawmill,sawning white pine for produce stand brought new in 2001 model 6020thecfarm
sawmill7~0.jpg
log stop I painted around the point that holds the cant in place.thecfarm
thecfarmbunk.jpg
this how the log bunk connects to the framethis bunk can be moved by loosening the bolt thecfarm
thecfarmsupport.jpg
frame of millshowing the 3" angle that the wheels run on. the cross member and the 2X4 tubing.thecfarm
thecfarmlogdoginuse.jpg
log clamp in usethis shows the log clamp in use. note there is no space by tubing.really bites in good to the tubing. will not release by itself or pick up the cantthecfarm
thecfarmlogdogopen.jpg
log clamp not in usethis showing the clamp open,not in use.Note the space by the green square tubing. the clamp can be moved very easily on the tubing. the clamp can be moved up too,to about 6 inches.thecfarm
slabs.JPG
hemlock slabsthecfarm
 
27 files on 1 page(s)