iDRY Vacuum Kilns

Sponsors:

Building stuff knowledge i don't seem to have

Started by Grizzly, December 14, 2017, 04:40:53 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Kbeitz

Kinda hard for me to draw but If you could mount some 1/2" thick angle iron in a saddle of the pole and sit your beams on top of the angle and bolt everything fast to the pole that sure would make it strong.

Collector and builder of many things.
Love machine shop work
and Wood work shop work
And now a saw mill work

Don P

In your mind push on the pole in each direction like a roof on an unenclosed building in the wind. Start welding bracing on that angle :(

Kbeitz

Quote from: Don P on March 18, 2018, 09:24:33 PM
In your mind push on the pole in each direction like a roof on an unenclosed building in the wind. Start welding bracing on that angle :(
I agree 100 percent...
Collector and builder of many things.
Love machine shop work
and Wood work shop work
And now a saw mill work

Thank You Sponsors!