iDRY Vacuum Kilns

Sponsors:

Spring sawing pics

Started by Quebecnewf, May 02, 2017, 08:08:59 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Quebecnewf

We have been sawing of and on as the weather permits this spring



We still have lots of snow but it is melting . That is the bottom of my kiln that blew over last fall still half snowed over.


This is part of an order of 4x4's and 2x4's that we sawed last week . The 2x4's are D4S the 4x4 ,s were left rough .



This is the planer shed. Went in and cleaned the shavings this morning. We have sawed about 225 logs which is good for us so far.

Good winter and not go bad spring

Quebecnewf

derhntr

2006 Woodmizer LT40HDG28 with command control (I hate walking in sawdust)
US Army National Guard (RET) SFC

Magicman

Yes Sir, I love following your progress & operation.
Knothole Sawmill, LLC     '98 Wood-Mizer LT40SuperHydraulic   WM Million BF Club Member   WM Pro Sawyer Network

It's Weird being the Same Age as Old People

Never allow your "need" to make money to exceed your "desire" to provide quality service.....The Magicman

Peter Drouin

Good job, I get a kick on how you stick your lumber. What are the big tanks on top of the hill?
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

Don_Papenburg

I would bet the tanks are propane
Frick saw mill  '58   820 John Deere power. Diamond T trucks

Quebecnewf

The two tanks are insulated and heated water tanks. They are part of the town water supply system . New system since just two years. Those two hold treated water. Just out of frame is another tank with raw water. Water comes from three small lakes on the island . Pumped into the raw water tank . Treated at the water treatment plant then transferred to those two tanks in the pic and then by heated pipeline to the homes in the village. Seems to be working good.

Quebecnewf

Peter Drouin

A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

thecfarm

A barren place. At least you have room to pile lumber.  ;D
Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

Thank You Sponsors!