iDRY Vacuum Kilns

Sponsors:

Taking Delivery

Started by Jeff, March 23, 2017, 07:54:35 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Gearbox

5% is 5% in Jeff's pocket . Just kidding .
A bunch of chainsaws a BT6870 processer , TC 5 International track skidder and not near enough time

bill m

I have a bed with tailgate for an old Dodge in almost as good shape but no wood floor. You can have it.
NH tc55da Metavic 4x4 trailer Stihl and Husky saws

grouch

I bid 2 cat's eye marbles, 4 bottle caps, and half a hershey bar.

Deliver it and I'll toss in a Dr. W. B. Caldwell's Laxative Senna bottle (slightly cracked, no cork).
Find something to do that interests you.

Jeff

Quote from: bill m on May 29, 2017, 09:43:16 PM
I have a bed with tailgate for an old Dodge in almost as good shape but no wood floor. You can have it.

Bill does your box have the squarish fenders or rounder? From what I can find, the trailer box is 53-85 all had the squared fenders.
Just call me the midget doctor.
Forestry Forum Founder and Chief Cook and Bottle Washer.

Commercial circle sawmill sawyer in a past life for 25yrs.
Ezekiel 22:30

TKehl

PM sent.  But it's a looong drive to Missouri. 
In the long run, you make your own luck – good, bad, or indifferent. Loretta Lynn

sandhills

CAMPER? (somehow I don't think I'm getting far with this  :D)

Jeff

After sleeping on it, I don't think the dodge would be happy at all with those square fenders. While the box and tailgate might work, Missouri is just to far. I could build a flat bed for the gas cost.  Thanks for the opportunity though. :)
Just call me the midget doctor.
Forestry Forum Founder and Chief Cook and Bottle Washer.

Commercial circle sawmill sawyer in a past life for 25yrs.
Ezekiel 22:30

TKehl

You are quite welcome!

I'm enjoying your project.  I had a 47 Dodge 2 ton a few years back, but sold it to a guy in GA who wanted it to advertise jelly.    ;D  They just have very nice lines.
In the long run, you make your own luck – good, bad, or indifferent. Loretta Lynn

red

I think you can find rear fenders to be mounted on a homemade metal box.
Honor the Fallen Thank the Living

Roxie

Quote from: POSTONLT40HD on May 29, 2017, 09:06:14 PM
TKehl.......read this before you sell it to Jeff.

https://forestryforum.com/board/index.php/topic,4193.0.html

:D :D :D :D

That moment when you realize that you and an old goat think alike.  :o
Say when

paul case

For a guy with a sawmill and trees of his own and a truck that needs a bed that will no doubt be wearing a Forestry Forum sticker, at the least, should have a rough sawn wood bed.

PC
life is too short to be too serious. (some idiot)
2013 LT40SHE25 and Riehl edger,  WM 94 LT40 hd E15. Cut my sawing ''teeth'' on an EZ Boardwalk
sawing oak.hickory,ERC,walnut and almost anything else that shows up.
Don't get phylosophical with me. you will loose me for sure.
pc

Jeff

I want to fix the truck up, but I don't want to be baby sitting a wood box. Then you have to worry every time it rains
Just call me the midget doctor.
Forestry Forum Founder and Chief Cook and Bottle Washer.

Commercial circle sawmill sawyer in a past life for 25yrs.
Ezekiel 22:30

Dave Shepard

I think your wheelbase might be too long for that box, anyway.
Wood-Mizer LT40HDD51-WR Wireless, Kubota L48, Honda Rincon 650, TJ208 G-S, and a 60"LogRite!

Jeff

Lettering concept. Whaddayathink?



  

 
Just call me the midget doctor.
Forestry Forum Founder and Chief Cook and Bottle Washer.

Commercial circle sawmill sawyer in a past life for 25yrs.
Ezekiel 22:30

Papa1stuff

Looks great to me 8) 8) 8) 8)
1987 PB Grader with forks added to bucket
2--2008 455 Rancher Husky
WM CBN Sharpener & Setter

TKehl

Thumbs up here!

Paint, magnet, or sticker?
In the long run, you make your own luck – good, bad, or indifferent. Loretta Lynn

sandsawmill14

Quote from: Jeff on May 30, 2017, 12:40:06 PM
Lettering concept. Whaddayathink?



  

 

i think it would look better on a chevy ;D ;)  just kidding :D :D :D looks good i like it  :)
hudson 228, lucky knuckleboom,stihl 038 064 441 magnum

Weekend_Sawyer

Imagine, Me a Tree Farmer.
Jon, Appalachian American Wannabe.

sandhills


grouch

Quote from: Jeff on May 30, 2017, 12:40:06 PM
Lettering concept. Whaddayathink?



  

 

Can you shrink it just enough so that it doesn't cross that crease in the door near the window?
Find something to do that interests you.

Jeff

I actually did that on purpose, but I tried it smaller and I think you are right. I think its better  :)



 
Just call me the midget doctor.
Forestry Forum Founder and Chief Cook and Bottle Washer.

Commercial circle sawmill sawyer in a past life for 25yrs.
Ezekiel 22:30

grouch

Quote from: Jeff on May 30, 2017, 02:27:28 PM
I actually did that on purpose, but I tried it smaller and I think you are right. I think its better  :)



 

There it is! Now you can get more gray hairs making this decision:

Quote from: TKehl on May 30, 2017, 01:22:23 PM
Thumbs up here!

Paint, magnet, or sticker?
Find something to do that interests you.

Jeff

Just call me the midget doctor.
Forestry Forum Founder and Chief Cook and Bottle Washer.

Commercial circle sawmill sawyer in a past life for 25yrs.
Ezekiel 22:30

coxy

I like it :) :) :)  its going to be a long ride in it to CT to pick up a trailer then all the way to Boonville  ;D   jeff I did not forget about that book  its been crazy here

21incher

That looks good that size. It will be easy to reverse on the other side.  thumbs-up
Now all you need is one of those Tule Peak slabs on the back. :)
Hudson HFE-21 on a custom trailer, Deere 4100, Kubota BX 2360, Echo CS590 & CS310, home built wood splitter, home built log arch, a logrite cant hook and a bread machine. And a Kubota Sidekick with a Defective Subaru motor.

Thank You Sponsors!