iDRY Vacuum Kilns

Sponsors:

Homelite 360 Variants - Trying to Find a New Bar

Started by jimmy245, July 29, 2015, 02:28:10 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

jimmy245

Have a Homelite 360 (UT No. 104964).  When I look for info on it (for example Acres Site), they seem to be referring to a different saw altogether (the picture shows a totally different looking saw).   

I just ordered a new bar from little red barn.  It said bar would fit a 360, but just got bar today and its not even close. 

I would guess my 360 is an early variant of the 360 line, but I don't know.  I would think the UT No. referenced above should help id my exact variant of the 360.

Thus I need to know where to go to find a new bar (16", 3/8, .050, 60 links)

Also looking for op manual for the saw.  There are manuals on ebay for the 360, but again, the picture on manual doesn't show my saw.

Any Homelite experts out there who can help?

sawguy21

The Oregon site no longer lists a bar for that model, it must have been an oddball mount.
old age and treachery will always overcome youth and enthusiasm

Grandedog

     Howdy,
   If you're looking for an Oregon Brand bar, it's a 160RNDD196. They discontinued them a while back but, you can still find them around online.
Regards
Gregg
Gregg Grande
Left Coast Supplies LLC
1615B South Main Street  Willits, CA 95490
888-995-7307  Ph 707-602-0141                   Fax 707-602-0134  Cell 707-354-3212
E-Mail  gregg@leftcoastsupplies.com   www.leftcoastsupplies.com

SawTroll

Yes, Acres site lists D096 or D196 for the 360 that is pictured there.

360.
Information collector.

snowstorm

way back when i worked for a homelite dealer. some how the salesman talked great norther paper into buying a whole pickup load of 350"s the next week they brought back half a load for me to fix. they also bought a few 650's

Thank You Sponsors!