iDRY Vacuum Kilns

Sponsors:

Oh, the things one finds in barns.

Started by spraguep, July 20, 2015, 01:30:33 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

spraguep

I recently inherited an older Corley 2 bladed wood frame mill. Serial number is 50-C-0XX if means anything or there is look up to that code. Its complete, frame and shafts, arbors, both blades, track and carriage, pop up log turner, etc.  I have some potato quality pictures of it in the barn but I may have some pic of back when it was set up an running too. I'll post either if there is interest.

I remember running the mill as a kid (that would have been late 60's early 70's) and it worked just fine and all.  Before, back in the 50;s, he made a lot of pallets and the like.

Is there any interest in such things? Or is it just junk?

deadfall

I have a hard time resisting junk.  Even worse when it's not junk.  That post is going to go through here like a crank bait.
W-M LT40HD -- Siding Attachment -- Lathe-Mizer -- Ancient PTO Buzz Saw

============================

Happy for no reason.

mad murdock

I would sure like to find some "junk" like that!!
Turbosawmill M6 (now M8) Warrior Ultra liteweight, Granberg Alaskan III, lots of saws-gas powered and human powered :D

beenthere

Welcome to the Forestry Forum.
And yes, we are interested in seeing pics of the Corley.

Click on your user name, and you will find the profile button. Click that and update with a location. Helps to have an idea where in the world you are at. ;)
south central Wisconsin
It may be that my sole purpose in life is simply to serve as a warning to others

spraguep

Quote from: deadfall on July 20, 2015, 01:51:31 AM
That post is going to go through here like a crank bait.

I don't mean to troll if that's what you mean. I have some pictures of it in the barn. I didn't get to fully document it, I was in a hurry at the time and its a tad far from where I am now. The mill is in southeast Iowa, Mahaska county in particular and my dad had designs on setting it up again in southern Illinois.

Anyway, some sawmill pron. And sorry about the potato quality. I am going to find some pics of it assembled and in operation.

This is the lower end of the frame and serial number plate.

[img width=650 --Photos MUST be in the Forestry Forum gallery!!!!!--/BsBYo8K.png[/img]

 

The frame with upper shaft. The controls are on the opposite side of the frame as shown in this pic.



 

The log turner. It has a separate serial number on it. Just to the right is the lower shaft and arbor for the blade. The blades are in circular shipping crates so they are in good shape too. The botton is close to 5 foot dia and upper is 4 to 4 and a half in dia.
.


 

Some of the track and carriage.



 

I think I have some old pics of it in operation, it might even be me pulling the levers.




thecfarm

spraguep,welcome to the forum. We all will enjoy your pictures and memories.
Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

Ocklawahaboy

If you are hoping to sell it, you will find a buyer.  There is a board on here for that.  You will just pay a % to the forum.  If you are hoping to rehab it and move it home with you, you will get lots of help with that too. 

Either way, welcome to the forum.  I dreamt of having a mill fall in my lap but I bought one instead.

Chuck White

Welcome to the Forestry Forum, spraguep.
~Chuck~  Cooks Cat Claw sharpener and single tooth setter.  2018 Chevy Silverado and 2021 Subaru Ascent.
With basic mechanical skills and the ability to read you can maintain a Woodmizer  LT40!

Sixacresand

Welcome to the Forum,  Spraguep.  Looks like you're in for a good time with that old mill.
"Sometimes you can make more hay with less equipment if you just use your head."  Tom, Forestry Forum.  Tenth year with a LT40 Woodmizer,

Magicman

Welcome to the Forestry Forum, spraguep.

You will find plenty of interest in that sawmill here.   :)
Knothole Sawmill, LLC     '98 Wood-Mizer LT40SuperHydraulic   WM Million BF Club Member   WM Pro Sawyer Network

It's Weird being the Same Age as Old People

Never allow your "need" to make money to exceed your "desire" to provide quality service.....The Magicman

justallan1

Spraguep, welcome to the Forestry Forum.
There's plenty of folks on here plenty interested in whatever you are trying to do with your mill. Myself, I enjoy the heck out of reading up on them and seeing the pictures.
I have visited Port Angeles years ago and loved it. It's definitely some beautiful country. I was really impressed with shrimping off the docks while I was there.

deadfall

Quote from: spraguep on July 20, 2015, 02:41:14 AM
Quote from: deadfall on July 20, 2015, 01:51:31 AM
That post is going to go through here like a crank bait.

I don't mean to troll if that's what you mean.

Not at all.  That was just a short cast.  I knew that would be all it would take to get pretty much the whole school to rise. 

Many fish bites if you gots good bait.

I would love to see where this goes.

Welcome.
W-M LT40HD -- Siding Attachment -- Lathe-Mizer -- Ancient PTO Buzz Saw

============================

Happy for no reason.

spraguep

I have no idea what I am going to do. Logically it would be difficult for me to reassemble it (fun as all heck but just not practical). But, again, what the heck, I'm at the point of my life maybe I should throw practicality to the wind :) )  My dad quit farming about 4 years ago when he hit 80 but logging was his life long hobby. I got lots of 'stuff' too. A John Deere 440 skidder (his baby, totally rebuilt), a JD 450 crawler he just got, goose neck trailer to haul it all around, a self loader for a larger straight log truck, a number of electric motors (of questionable reliability) probably 50 to 100 horsepower range or so. I even have a 2 man chain saw.



Quote from: Ocklawahaboy on July 20, 2015, 06:52:43 AM
If you are hoping to sell it, you will find a buyer.  There is a board on here for that.  You will just pay a % to the forum.  If you are hoping to rehab it and move it home with you, you will get lots of help with that too. 

Either way, welcome to the forum.  I dreamt of having a mill fall in my lap but I bought one instead.

redbeard

Welcome spaugeup, were niegbors Iam 40 miles east of you by boat.
Whidbey Woodworks and Custom Milling  2019 Cooks AC 3662T High production band mill and a Hud-son 60 Diesel wide cut bandmill  JD 2240 50hp Tractor with 145 loader IR 1044 all terrain fork lift  Cooks sharp

spraguep

I go that way to see the tulips in April. I am not much on casinos, but there is a Cabalas in the Arlington area. ;) I work out of the Seattle area so I go that way a lot.

Quote from: redbeard on July 20, 2015, 11:17:22 AM
Welcome spaugeup, were niegbors Iam 40 miles east of you by boat.

spraguep

The person that got the handle on the end of the bar must have drawn the short stick. I think we started it when I was a kid and I think it probably still turns over but I like all my fingers and upper appendages so I'll not try.

So if anyone out there is looking for the latest in chainsaw tech, look no further, say no more and step right on up.



 

I am still looking for interior sawmill pictures.

SPD748

Oh man... I'm such a sucker for junk. Bring on the pics!!!

-lee
Frick 0 Handset - A continuing project dedicated to my Dad.

410 Deere, 240 Massey... I really need a rough terrain forklift :)

Sawing Since 1-19-2013 @ 3:30 pm
Serving Since 2002
"Some police officers give tickets, some gave all."

spraguep

Piles of log deck chains. Note the log tongs in the far upper right of the picture.



Magicman

Left is right, right is wrong.  (old saying)
Knothole Sawmill, LLC     '98 Wood-Mizer LT40SuperHydraulic   WM Million BF Club Member   WM Pro Sawyer Network

It's Weird being the Same Age as Old People

Never allow your "need" to make money to exceed your "desire" to provide quality service.....The Magicman

SPD748

That's just my luck. I looked for log deck chains for months without success. Here we have a whole pile! Such is life... I'll keep looking  :(

-lee
Frick 0 Handset - A continuing project dedicated to my Dad.

410 Deere, 240 Massey... I really need a rough terrain forklift :)

Sawing Since 1-19-2013 @ 3:30 pm
Serving Since 2002
"Some police officers give tickets, some gave all."

spraguep

My primary flight instructor painted 'R' and 'L' on the backs of my hands. Smart fellow, he was.

"On the port side of the picture, please note the log tongs" :)

spraguep

I had to secure a number of other items. My dad had a friend with lots of space and locked gates so I moved some items there.

I had my kids with me, and here is the youngest learning the ropes on a JD450 crawler.



He also had a JD 440 skidder. Both my girls, 9 and 11, got to drive it around the log yard.





ddcuning

Nice finds there. My uncle said he always liked sawing on a Corley. I always liked them because they were made in my hometown of Chattanooga. Even so, when I started looking for a mill, I wound up with a Frick due to the fact that it was only a few miles from my house and I didn't have to look much. ;D. Keep the pictures coming, looks very interesting!

Dave C
We're debt free!!! - Dave C, Nov 2015

Corley5

I've got a Corley log turner just like that and two Corley 5 mills.  One set up.  One not.  Look for them to show up in the For Sale Board soon ;) :).  I think the first two digits of Corley serial #s are the year.  Corley is still in business and can tell you.
Burnt Gunpowder is the Smell Of Freedom

spraguep

Called, the secretary sent me to a phone mailbox of someone that sounded important and never heard a thing back. Its hard to tell if they think you are a barking lunatic and want nothing to do with you or they just forgot to call you back. I might try email or go full frontal old fashioned and write a real letter.

Quote from: Corley5 on July 20, 2015, 08:03:18 PM
I've got a Corley log turner just like that and two Corley 5 mills.  One set up.  One not.  Look for them to show up in the For Sale Board soon ;) :).  I think the first two digits of Corley serial #s are the year.  Corley is still in business and can tell you.

Thank You Sponsors!