iDRY Vacuum Kilns

Sponsors:

Timberwolf sharpening in Missouri

Started by Ozarkoak, April 08, 2015, 02:05:17 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Ozarkoak

Looking for a sharpening service in Missouri for Timberwolf brand blades for an EZ Boardwalk Jr.  Any advise or experiences you have is appreciated.    Not looking to ship blades, looking to drop them off and pick them up.  Thanks

thecfarm

Ozarkoak,welcome to the forum. I stopped at a hardware store and asked about a sharpening sevice. I go directly to the guys buisness. Another hardware store has a drop off. Might even be a member close by that will do it for you.
Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

47sawdust

Sam Burholder
Verona,Missouri
He's Amish so not sure how to contact.Forum member Dave Boyt had an article about him in the April 2010 Sawmill and Woodlot magazine.I think he's very good.Perhaps Dave will chime in,if not send him a pm.Best of luck,I've used TW blades for 7 years with good results.

Just did a google search,phone# 417-461-4175
Mick
1997 WM Lt30 1999 WM twin blade edger Kubota L3750 Tajfun winchGood Health Work is my hobby.

Ozarkoak

Thanks for the replies guys!  I'll try both recommendations.

ozarkgem

Quote from: 47sawdust on April 08, 2015, 05:54:04 PM
Sam Burholder
Verona,Missouri
He's Amish so not sure how to contact.Forum member Dave Boyt had an article about him in the April 2010 Sawmill and Woodlot magazine.I think he's very good.Perhaps Dave will chime in,if not send him a pm.Best of luck,I've used TW blades for 7 years with good results.

Just did a google search,phone# 417-461-4175
Sam sold his sharpening business to a guy about 20 miles from me. Can't remember his name. St James is a long way from here. Don't know anyone it that area. Lots of mills over there though, should be someone.
Mighty Mite Band Mill, Case Backhoe, 763 Bobcat, Ford 3400 w/FEL , 1962 Ford 4000, Int dump truck, Clark forklift, lots of trailers. Stihl 046 Magnum, 029 Stihl. complete machine shop to keep everything going.

Ozarkoak

Ozark Gem, yes surely there is someone over this way.  I make it around the state somewhat often so certain areas of travel are doable.  Anyone near central Missouri sharpening band saw blades? 

Billikenfan

There is a guy in Festus I use.  He does a great job.  He charges $7 a blade.  If I lived in St. James I wouldn't have time to mill.  I would be at the trout park all the time.

Scott
2015 Woodmizer LT40  Hydraulic 35hp
Mountain Home Firewood Kiln. Beaver Wood Eater Firewood Processer.  John Deere 260 Skid Steer.

Thank You Sponsors!