iDRY Vacuum Kilns

Sponsors:

MS 210 questions

Started by uplander, February 23, 2015, 03:43:48 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

uplander

 I looked at a MS 210 on the dreaded Craig's list. It looked ok with just a little wear on the drive sprockets. Bar seemed to have little bit of hard use but still serviceable. Piston looked ok when I took off the muffler to view it.

Stihl no longer catalogs this saw but I would say it looked to be about 7 years old or so.

What would this saw have sold for new? Owner wanted 175.00$ and that seemed a little high to me.

It would be handy for me to limb with and for small diameter firewood.
Woodmizer lt40G28.  A kubota L4600 with loader and forks.
Various Stihl saws and not enough time to use them!
Finished my house finally. Completely sawn out on by band mill. It took me 7 years but was worth it. Hardest thing I have ever done.

pabst79

They sold for around 260ish new, no idea what they are worth used  :-\
Not sure which came first, but I have chickens and eggs.

Thank You Sponsors!