iDRY Vacuum Kilns

Sponsors:

Air Scraper

Started by chance33, February 05, 2015, 03:50:33 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

chance33

Anyone tried to use an air scraper for debarking, like the HF unit?

http://www.harborfreight.com/42-in-long-reach-air-scraper-69236.html

I did a FF search but got no hits for this idea. Have a compressor to drive it so if it would work it would be a good cheapie.
Mahindra 4025 4wd, FEL, Farm351P, Turner portable mill w/ 25 hp Honda, Wood Beaver 16 Processor.

bandmiller2

Mate I guess your the pioneer on this one give it a try it has to work to some extent, possibly very well. Please let us know. Frank C.
A man armed with common sense is packing a big piece

AnthonyW

Quote from: chance33 on February 05, 2015, 03:50:33 PM
Have a compressor to drive it so if it would work it would be a good cheapie.

Do you? 10 CFM at 90 psi sounds like an air hog.

Be sure to let us know how it works.
'97 Wood-Mizer LT25 All Manual with 15HP Kohler

shenandoahsawmill

I use a spade shovel in the end of an large electric impact gun. Same concept using electric rather than air. It works great.

Thank You Sponsors!