iDRY Vacuum Kilns

Sponsors:

518 cat

Started by coxy, November 05, 2014, 11:22:38 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

coxy

 has any one gone through this  if you turn to the left the motor starts moving bad side to side  go to the right and nothing the motor stays still could it be a bad tranny mount or the rubber mount on the front of the motor   its hard to see what it is when your driving it looking out the side   thanks

Ken

Bad mount(s) would be my guess.  Good luck
Lots of toys for working in the bush

coxy

found  it    the bolts where out of the tranny mount on the left side what a PAIN IN  THE you know what   to get the bottom bolts in with the skid pans all bent up  ;D ;D 

Thank You Sponsors!