iDRY Vacuum Kilns

Sponsors:

Forklift Conversion

Started by smwwoody, August 10, 2014, 08:04:36 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

smwwoody

What do you do when you need a forklift in the woods to lift a valve body into place on your loader?

You make one





Full time Mill Manager
Cleereman head rig
Cooper Scragg
McDonugh gang saw
McDonugh edger
McDonugh resaw
TS end trim
Pendu slab recovery system
KJ4WXC

Dave Shepard

 :) What was the fix for your valve body?
Wood-Mizer LT40HDD51-WR Wireless, Kubota L48, Honda Rincon 650, TJ208 G-S, and a 60"LogRite!

smwwoody

not sure we put what we were told was a good used valve body in and it worked great for about 3 hours then the used one started giving us more problems than the old one.  I am going to buy another loader in the morning.  Cant afford any more down time.
Full time Mill Manager
Cleereman head rig
Cooper Scragg
McDonugh gang saw
McDonugh edger
McDonugh resaw
TS end trim
Pendu slab recovery system
KJ4WXC

BargeMonkey

 Thats a pretty good idea.  :D.  Loader just keeps giving you a hard time  ?

thecfarm

Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

Thank You Sponsors!