iDRY Vacuum Kilns

Sponsors:

Basic chain sharpening how to video.

Started by Andyshine77, June 11, 2014, 05:01:47 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Andyshine77

There's been quite a few threads lately discussing proper chain sharpening techniques. I made this video to show my methods and experience. This is very basic stuff, that anyone can do with a little patience and practice. If anyone has any questions feel free.

Edit. Don't know why I said hold the file 90 degrees from the ground .I meant flat or with a slight up angle, say 5 degrees.

http://youtu.be/4x-vx2Kn5UI

       
Andre.

Silvanus

"There are some who can live without wild things and some who cannot."  -AL

drobertson

good video, should help some folks with the task.
only have a few chain saws I'm not suppose to use, but will at times, one dog Dolly, pretty good dog, just not sure what for yet,  working on getting the gardening back in order, and kinda thinking on maybe a small bbq bizz,  thinking about it,

thecfarm

A mighty fine video!! I will have to bookmark for future members. I do like to use a marker to keep track of where I started. I know I can tell by how shiny it is where I just sharpened. But just something I like too do. Yes,it is simple.but without what you just showed,it's hard to explain. And the why too. Good job again.
Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

WmFritz

Most excellent video!
I learned  a few things.

Nice saw collection too, BTW.  ;)
~Bill

2012 Homebuilt Bandmill
1959 Detroit built Ferguson TO35

Andyshine77

Quote from: WmFritz on June 11, 2014, 07:08:36 PM
Most excellent video!
I learned  a few things.

Nice saw collection too, BTW.  ;)

Thanks for the compliments, it means alot.

Andre.
Andre.

7sleeper

Hi Andyschine77,

I hope you don't disaprove of me showing my comparison in your thread.

Cutting is done with a 2000W Makita electric chainsaw (it was Saturday afternoon and I didn't want to upset the neighbors).

First part is brand new Stihl chain.
Second part is after sharpening with HF type electric grinder.
Third part is after filing with Husqvarna roller guide and brand new round file 4.8mm. 5 strokes per tooth. I didn't have a new 4.5mm on hand as Stihl usually requires.

Wood is some type of fir/spruce/pine construction wood.

Checked the rakers and filed them after every filing.

https://www.youtube.com/watch?v=Ggqwg99pFzE

https://www.youtube.com/watch?v=Ggqwg99pFzE

hhmmm can't insert the video somehow. At least the link is present for everyone interested.

7

Andyshine77

Quote from: 7sleeper on June 14, 2014, 01:46:14 PM
Hi Andyschine77,

I hope you don't disaprove of me showing my comparison in your thread.

Cutting is done with a 2000W Makita electric chainsaw (it was Saturday afternoon and I didn't want to upset the neighbors).

First part is brand new Stihl chain.
Second part is after sharpening with HF type electric grinder.
Third part is after filing with Husqvarna roller guide and brand new round file 4.8mm. 5 strokes per tooth. I didn't have a new 4.5mm on hand as Stihl usually requires.

Wood is some type of fir/spruce/pine construction wood.

Checked the rakers and filed them after every filing.

https://www.youtube.com/watch?v=Ggqwg99pFzE

https://www.youtube.com/watch?v=Ggqwg99pFzE

hhmmm can't insert the video somehow. At least the link is present for everyone interested.

7

I don't disapprove whatsoever. The last chain doesn't have proper hook, do to the file being a little too large. The tooth is blunt. The other two chains cut well enough for what I assume is 3/8 low pro chain. The husky guides also don't work well on Stihl chain. Different geometry.

Here's a chain I hand filed squared a few years back.
http://youtu.be/OKaPEEPSbdI
Andre.

mad murdock

Nice "how to" on the sharpening vid. Thanks for posting.
Turbosawmill M6 (now M8) Warrior Ultra liteweight, Granberg Alaskan III, lots of saws-gas powered and human powered :D

sawguy21

old age and treachery will always overcome youth and enthusiasm

trhill

Just bought the stihl file guide and made a huge difference. I was filing to low and getting too much hook. Thanks for the video

Andyshine77

Quote from: trhill on June 17, 2014, 11:22:16 AM
Just bought the stihl file guide and made a huge difference. I was filing to low and getting too much hook. Thanks for the video

You're welcome. Filing too low is a very common problem.
Andre.

chainsaw samurai

Thanks Andy! very informative, I learned a lot.

Thank You Sponsors!