iDRY Vacuum Kilns

Sponsors:

Some more winter pics

Started by 1270d, February 16, 2014, 04:21:34 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

1270d

in a nice patch of aspen


  
trail down a ridge


  
TJ 1010d being operated by a forum member


 
a nice hemlock


 

snowstorm

dose it limb hemlock ok? some of the hemlock we have here will have 3" limbs on it and so close together its trying to get 3 or 4 off at once

1270d

as long as they dont have the big knobs at the base of the limb it does good.  it helps that we ve had temps below zero for quite a while

snowstorm

in the spring with the bark slipping its like trying to limb an ice cube

Corley5

 8) 8) pics  8) 8)  Your terrain is a bit rougher than ours  :)
Burnt Gunpowder is the Smell Of Freedom

Ken

What year is the 1270?   Looks like some pretty rough terrain.  Always a challenge to figure out how to attack some blocks.  Although the harvester can cut it getting it to the haul road can be a challenge.
Lots of toys for working in the bush

SliverPicker

Yooper by trade.

1270d

You got the location sliverpicker.   

Its an 08 ken

pasbuild

If it can't be nailed or glued then screw it

Thank You Sponsors!