iDRY Vacuum Kilns

Sponsors:

Really Getting Stressed Out Now

Started by Corley5, February 04, 2014, 08:09:45 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Corley5

  So I got the Fabtek fixed up and running with the new injection pump a while back.  All was good but the weather has been so DanG cold that I've chosen not to run it for fear of a weather related breakdown that could have been avoided by staying home.  Well the weather has warmed up.  It's been in the upper teens to near 20 that last few days  ::) 8)  Sunday I fired it up, warmed it up checked out all the functions and got it ready for yesterday.  Everything was fine.  Yesterday I fired her up, let her warm up and headed for the trees only lose my hydraulic functions.  Everything.  Tracks, everything  >:( >:( >:( >:( >:( >:( >:( >:( >:( >:( >:(  With a little screwing around I discovered that if I opened and closed the door and hit the arming switch it would work for a bit.  Magnetic door switch bad?  I bypassed it with a toggle switch and all was good I headed back to the woods only to have it quit again.  Limped it back by switching it on and off and resetting.  I unhooked the toggle and connected the wires directly.  Same thing.  I called Tony, the mechanic, who came out today and tracked down the problem.  He thought it was a relay when he got to the job but after some testing and thought he tracked it to a bad solenoid/coil.  There are three of them and he switched out one with what he figured was the bad one and it solved the problem however then he discovered that another one of the three was also cracked but still working.  One of these controls the pilot pressure, one the track speeds and the other the house swing.  The two are cracked and swelled like a battery that has frozen.  I haven't found any online yet.  These are Parker S8LD 12VDC 14W.  I've found 24V and 120V but so far no 12Vs.  There's a Parker Store in Traverse City that I'm going to call in the AM.
  I'm over it.  Just  about ready to put in an application at Home Depot  :(     
Burnt Gunpowder is the Smell Of Freedom

Firewoodjoe

Sorry to hear that. Sounds like one of my days! But I don't have any electric over hydraulic stuff of which I thought it out that way. You'll get it. And besides not Home Depot. You'd be better of using an ax and buck saw. At least for your pride lol. No offense Home Depoter's!! Better days are coming. Already got another hour of day light

WDH

Greg,

Hopefully, the sun will shine brighter on you tomorrow. 
Woodmizer LT40HDD35, John Deere 2155, Kubota M5-111, Kubota L2501, Nyle L53 Dehumidification Kiln, and a passion for all things with leafs, twigs, and bark.  hamsleyhardwood.com

husky fan 500

it sound like you had one of those days where all u do is fight and all u want to do is give up.  just walk away for a while the try again

BargeMonkey

 Don't feel to bad, your not the only one. Got out of my truck quick the other day to deal with equipment drama and ripped the Achilles and 2 other great muscles in my leg. 6-12 weeks on the couch. Your better off saying the hell with it some days, fought all week getting stuff running to get nothing done.

Corley5

Quote from: BargeMonkey on February 04, 2014, 11:44:04 PM
Don't feel to bad, your not the only one. Got out of my truck quick the other day to deal with equipment drama and ripped the Achilles and 2 other great muscles in my leg. 6-12 weeks on the couch. Your better off saying the hell with it some days, fought all week getting stuff running to get nothing done.

OUCH!!

I called the ParkerStore in TC and there's one of these coils in Grand Rapids.  It's on its way but a second one is a thirty day wait according to the computer in TC.  The guy there is hoping that the GR store may have a better story.  One should get it going.  One of them although cracked and puffed still worked.
Burnt Gunpowder is the Smell Of Freedom

lynde37avery

hope things get better for ya. when the machines act up its never any fun.
i have had days where all day into the next im trying to figure out a breakdown. but things get better.
Detroit WHAT?

thecfarm

Corley,that is too bad to hear. There is always something. But you have had your luck of "somethings". It's about time for you to have some good luck on your side.If I had any good luck to spare,I would send you a bunch.  ;D
Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

Autocar

Corley if you get a chance call the Surplus Center at 800-488-3407 and ask them if they have anything like that. There pretty good about have some pretty crazy stuff sometimes. There web page dosen't show alot of there inventory. Hang in there all of us have those days I feel for you  :-\.
Bill

Ford_man

Corly5, if you have any combine salvage yards in your area you may be able to find one there most combines use solenoids for all of the hyd functions, but you will have to compare them to see if one would work for you. good luck. splitwood_smiley splitwood_smiley

mad murdock

Corley, I hope your days get better.  Is the coil something extra special, or can it be sourced from another MFG?  a good hydraulics shop should be able to see if there is something in Vickers that will work.  Parker stuff is good and all, but their spares support has really gone to the dogs the last few years, IMO.  Eaton has been buying up all the rest, and are supporting their stuff with engineering and manufacturing backbone.  We have swithced most of our stuff to Eaton/Vickers, for that reason, parts can be gotten easily. 
Turbosawmill M6 (now M8) Warrior Ultra liteweight, Granberg Alaskan III, lots of saws-gas powered and human powered :D

clww

Corley, I hope next week is a better one for you! :)
Incidentally, I drove by a Lowe's that's "Now Hiring" awhile ago on my way home. ;D
Many Stihl Saws-16"-60"
"Go Ask The Other Master Chief"
18-Wheeler Driver

Peter Drouin

I think we all have had days like that. Sometimes weeks. :D :D hang in there.
And good luck  8)
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

Bobus2003

Are these Similiar to those on a Timbco? I have a bunch of parts from when I was running boom so I may have a few laying in the truck or shop.

Corley5

I'm not sure what a Timbco has  :)  These have a 1/2" center and a 3 prong male DIN connection.  I got the new one yesterday and hope to have it back together later today.  I'll put the bad one that still works on the track two speed control valve for now.  Now that I've got the whole part # I've found a couple other suppliers but haven't made any contacts yet. 
Burnt Gunpowder is the Smell Of Freedom

redprospector

Quote from: Corley5 on February 05, 2014, 08:16:54 AM


OUCH!!

I called the ParkerStore in TC and there's one of these coils in Grand Rapids.  It's on its way but a second one is a thirty day wait according to the computer in TC.  The guy there is hoping that the GR store may have a better story.  One should get it going.  One of them although cracked and puffed still worked.
30 days out? That must mean that there is not another one that exist in the world. Unless they're putting it on that proverbial "slow boat from China".
1996 Timber King B-20 with 14' extension, Morgan Mini Scragg Mill, Fastline Band Scragg Mill (project), 1973 JD 440-b skidder, 2008 Bobcat T-320 with buckets, grapple, auger, Tushogg mulching head, etc., 2006 Fecon FTX-90L with Bull Hog 74SS head, 1994 Vermeer 1250 BC Chipper. A bunch of chainsaws.

Ken

Corley5  I feel your pain.  We should start a specific thread that will help all of us source parts for our machines that are not always easily sourced and financially acceptable.   This is a common problem with those of us that buy machines for the first time and the costs can really add up when you don't know where to look. 
Lots of toys for working in the bush

lumbertick

Corley5 how much was that? i need one for mine... my tracks are stuck in high.. cat wants $190 for one

Corley5

It was $46.50 but with UPS shipping and tax the total was $63.08.  Not a bad price really especially when compared to Cat.  Parker's part # is S8LDD012.
Burnt Gunpowder is the Smell Of Freedom

thecfarm

lumbertick,welcome to the forum. Been logging long? Other equipment?
Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

lumbertick

My dad bought out Leonard Forest Products in 1996.. we starded by just have 4 self loading log trucks hauling wood.. Now we just have one self loader and a 2005 fabtek 133 procesor and a 2005 346B forwarder. Just me my dad and my brother run the stuff... At one time we had 21 people working for us.... the logging here in michigan took a [I have typed a profane word that is automatically changed by the forum censored words program I should know better] about 5 years ago... but it is really starting to come back now..if fuel wood just go back down to $.95 a gallon we would all be rich!

lumbertick

Ive been in the woods 9 years my brother 7 years and my dad 36 years!

Corley5

Got it running and cut the first trees with it in almost six weeks.  It gets a real workout tomorrow.
Burnt Gunpowder is the Smell Of Freedom

redprospector

Quote from: Corley5 on February 08, 2014, 04:47:50 PM
Got it running and cut the first trees with it in almost six weeks.  It gets a real workout tomorrow.

Good deal!!!
Glad you got it going without having to wait 30 days. My Bobcat T320 has those solenoid/coil things to control the hydraulics, come to think of it, so does my Fecon FTX-90. I had one go out on my Bobcat last year, right after I had the engine rebuilt. I just knew my mechanic buddy had hooked something up wrong (but thankfully didn't accuse him of it  :D). We tried to figure it out for a few hours when another friend (who has a T320 also) came by and said to try swapping out the solenoids. I now carry a couple of spares to avoid down time, hopefully that will make it where none of them ever quit again.
I'll have to order a couple for the Fecon too, now that I just realized it has them too. Everything else I have is old enough that I don't have to worry about electronics, other than a tach or 2.
1996 Timber King B-20 with 14' extension, Morgan Mini Scragg Mill, Fastline Band Scragg Mill (project), 1973 JD 440-b skidder, 2008 Bobcat T-320 with buckets, grapple, auger, Tushogg mulching head, etc., 2006 Fecon FTX-90L with Bull Hog 74SS head, 1994 Vermeer 1250 BC Chipper. A bunch of chainsaws.

barbender

Red, how many hours did your T320 have on it when you had to rebuild the engine?
Too many irons in the fire

Thank You Sponsors!