iDRY Vacuum Kilns

Sponsors:

Wondering about a Woodland Mill ?

Started by Peder McElroy, January 07, 2014, 03:00:25 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Peder McElroy

I'm in need of another mill @ a low price and would like some feed back.I have a Lucas 618 and had a woodmizer lt40.but the lt 40 is gone now and I need another bandmill now and then.

york

sponsor on the left side here and they can be found on
you tube....
Albert

thecfarm

Depends on what you expect out of it. It's on the light side,as far as the base. But so are some others too. I don't feel it's a mill that could be used every day for 4-5 hours,but it's does not cost $7000 either.
Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

Magicman

The two videos on the Woodland Mills website show a very nice sawmill for occasional use, and at a very affordable price.   :)
Knothole Sawmill, LLC     '98 Wood-Mizer LT40SuperHydraulic   WM Million BF Club Member   WM Pro Sawyer Network

It's Weird being the Same Age as Old People

Never allow your "need" to make money to exceed your "desire" to provide quality service.....The Magicman

Peder McElroy

Thanks for the reply's  I also only cut soft wood (Redwood)

Thank You Sponsors!