iDRY Vacuum Kilns

Sponsors:

I forgot to fill the OWB

Started by thecfarm, November 11, 2013, 09:13:06 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

thecfarm

There is a thread about have to get it in the right holes over in the chainsaw board. Well, have to fill the owb too.   ::)  I forgot last night. I got up this morning and turned the heat up.I was on here and I could still hear the blower on longer than what it should have run for. I have FHA and thought it was odd. Than the smiley_lit_bulb came on. I went out to the OWB,water temp down to about 130° and nothing but coals. A little bit of wood and I was all set. Not the first time I have done this and I know it won't be the last.
Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

chevytaHOE5674

Happens to me on occasion and it usually seems to be when its real cold and windy for some reason. :D


DDDfarmer

Mostly happens here when the kids " fill " the furnace ::)
Treefarmer C5C with cancar 20 (gearmatic 119) winch, Husky 562xp 576xp chainsaws

LAZERDAN

Ain't that the truth !  My woodmaster is always hungary.

Thank You Sponsors!