iDRY Vacuum Kilns

Sponsors:

TF workshop in Atlanta, GA

Started by Jim_Rogers, December 21, 2012, 02:43:17 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Jim_Rogers

I client of mine is hosting a workshop at his place. I'm going to travel down there to help him cut some joints for his screen house frame.

You can see his frame design here:

https://forestryforum.com/board/index.php/topic,3603.0.html

Post #8.

If you're in this area of Georgia and you want to stop by and help out, and learn how to cut joints then drop me an email or PM and we can discuss the fine details further.

Jim Rogers
Whatever you do, have fun doing it!
Woodmizer 1994 LT30HDG24 with 6' Bed Extension

Stephen1

Jim, I am still interested in attending. I should know tomorrow if I can get the time off work.
Cheers,
Stephen
IDRY Vacum Kiln, LT40HDWide, BMS250 sharpener/setter 742b Bobcat, TCM forklift, Sthil 026,038, 461. 1952 TEA Fergusan Tractor

WDH

Woodmizer LT40HDD35, John Deere 2155, Kubota M5-111, Kubota L2501, Nyle L53 Dehumidification Kiln, and a passion for all things with leafs, twigs, and bark.  hamsleyhardwood.com

Jim_Rogers

Whatever you do, have fun doing it!
Woodmizer 1994 LT30HDG24 with 6' Bed Extension

Jim_Rogers

Stephen1:
Are you going to be able to make it?

Jim

Whatever you do, have fun doing it!
Woodmizer 1994 LT30HDG24 with 6' Bed Extension

rospaw

Jim, Can you give me some details on the workshop? Where, times, cost, things the workshop is covering ect. Thanks

Jim_Rogers

Quote from: rospaw on January 03, 2013, 07:19:32 AM
Jim, Can you give me some details on the workshop? Where, times, cost, things the workshop is covering ect. Thanks

I just sent you a pm with some info.

Jim Rogers
Whatever you do, have fun doing it!
Woodmizer 1994 LT30HDG24 with 6' Bed Extension

Stephen1

Jim I will not be able to make it. I coyld not get the time off work.
I will try for another time.
Stephen
IDRY Vacum Kiln, LT40HDWide, BMS250 sharpener/setter 742b Bobcat, TCM forklift, Sthil 026,038, 461. 1952 TEA Fergusan Tractor

Jim_Rogers

Well, I'm in GA now.

Nice place, very nice host, site, timbers, and food.

I'll try and post some photos tomorrow night.

Here is a drawing of the frame we're working on:



There will not be any lower girts connecting the posts. Instead there will be a short knee wall and boards around the screen house.

The fireplace is very nice, and will be great when it's all done.

Will anyone have a chance to stop by and visit?

Jim Rogers
Whatever you do, have fun doing it!
Woodmizer 1994 LT30HDG24 with 6' Bed Extension

Thank You Sponsors!