iDRY Vacuum Kilns

Sponsors:

Stihl Serial Numbers?

Started by mtnman, November 28, 2012, 04:25:23 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

mtnman

I was trying to record the serial numbers from my saws in case they were stolen and I have found numbers all over the saws.  I decided the numbers may be part numbers.

Where can I find the serial numbers on my saws?
(017, MS250 and MS290)
Thanks,
mtnman

AdkStihl

J.Miller Photography

clww

As shown, inboard of the chain cover on the top, near the muffler. It may be covered in grime and carbon buildup but it is there.
Many Stihl Saws-16"-60"
"Go Ask The Other Master Chief"
18-Wheeler Driver

mtnman

OK, I think I can find it now that I know where to look.
Thanks!
mtnman

mtnman

I cannot find the serial number on my MS250?
I found the other 2 saws right where you said.
Looks like a sticker on the MS250 which I cannot read?
Where else can I look?
mtnman

AdkStihl

Quote from: mtnman on November 29, 2012, 12:06:08 PM
I cannot find the serial number on my MS250?
I found the other 2 saws right where you said.
Looks like a sticker on the MS250 which I cannot read?
Where else can I look?
mtnman

Its there. Might look like DOT MATRIX on the plasic.....but its there.
J.Miller Photography

joe_indi

Quote from: AdkStihl on November 29, 2012, 03:38:26 PM
Quote from: mtnman on November 29, 2012, 12:06:08 PM
I cannot find the serial number on my MS250?
I found the other 2 saws right where you said.
Looks like a sticker on the MS250 which I cannot read?
Where else can I look?
mtnman

Its there. Might look like DOT MATRIX on the plasic.....but its there.



 

mtnman

I finally found it!
It is on the rope side of the engine by the muffler.
It is under the handle that comes up from the rope side.
I had to spray some brake cleaner on it and wipe it and it showed up.
And yes it is like the other two saws in "Dot Matrix".
I am glad to get that done, we have a theif on the mountain that has already broke into a neighbors place and stole their chainsaw, blower and weedeater.
We are going out of town for a few days and when we get back I am going to hide the vehicles inside the garage and catch me a crook!
Thanks for your help.
mtnman

DWLaurie

This was EXTREMELY helpful! I was taking inventory for my homeowner's policy and I was going absolutely Guano Loco trying to find the serial number on my MS-250.......Thanks you to fellas, I FOUND IT! Now the only problem is trying to read the damned thing!!! Is that a 5 or a 6? What, is that a 2 or a 3? UGH!

sablatnic

Quote from: DWLaurie on October 08, 2015, 09:32:23 AM
! Now the only problem is trying to read the damned thing!!! Is that a 5 or a 6? What, is that a 2 or a 3? UGH!

Always a problem, even when new!!   :'(

beenthere

DW
Welcome to the Forestry Forum.

Glad you found info needed, but FYI.. the official and only swear word here is "DanG"..  just so you know. ;)

You're welcome to change it, but Denmark will need to oblige as well. 
south central Wisconsin
It may be that my sole purpose in life is simply to serve as a warning to others

SawTroll

A little more about Stihl serial numbers:
Information collector.

Thank You Sponsors!