iDRY Vacuum Kilns

Sponsors:

A day cutting wood

Started by Peter Drouin, May 01, 2012, 08:49:55 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Peter Drouin

30'


  

 
Did a bunch, Be done Tuesday on the long stuff, The rest 16' and shorter.
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

Darrel

My house is going to need a 30' beam, too bad you live so far away.
1992 LT40HD

If I don't pick myself up by my own bootstraps, nobody else will.

4x4American

You can add your 6' extension to that all too and maybe start to compete with dave shepard lol
Boy, back in my day..

paul case

Is he trying to make up for something  or just make us look bad by sawing logs that long?

PC
life is too short to be too serious. (some idiot)
2013 LT40SHE25 and Riehl edger,  WM 94 LT40 hd E15. Cut my sawing ''teeth'' on an EZ Boardwalk
sawing oak.hickory,ERC,walnut and almost anything else that shows up.
Don't get phylosophical with me. you will loose me for sure.
pc

nativewolf

Likely he's just compensating. 
Liking Walnut

Peter Drouin

Quote from: 4x4American on May 09, 2017, 06:21:53 AM
You can add your 6' extension to that all too?


Yes.
Quote from: nativewolf on May 09, 2017, 08:55:08 AM
Likely he's just compensating. 


Maybe, maybe not.

smiley_biggrin01


A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

Peter Drouin

More wood,


  

  

  

 

Had a friend stop by to say Hi,


  

 
Mr coopers hawk,
I cut some beams today, and the logs are a little small for the size of the beam the customer wants.


  

 

I see some mills not only separated by length. Some also go with diameter too.
So if I need a 6x6 I can go to a small log pile, [8" to 12"] get a log and cut and not have a bunch of overrun,
Separating 16'

 
Well, that's the idea.  :D :D

A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

fishfighter

On your shed, the roof rafters, what size are they? 3"x6"? Are they set on 4' center? I am planning on a roof line like that for mine. I could use the extra height to let out heat in the summer. No snow load down here in the south.

Peter Drouin

A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

fishfighter

Thanks. I'm thinking true 3x6 should work for me. Set them 24" oc. Will install a metal roof.

paul case

I am guessing you never have snow Fish, so I bet you are right. Peter has SNOW so he has to go a bit heavier made.

PC
life is too short to be too serious. (some idiot)
2013 LT40SHE25 and Riehl edger,  WM 94 LT40 hd E15. Cut my sawing ''teeth'' on an EZ Boardwalk
sawing oak.hickory,ERC,walnut and almost anything else that shows up.
Don't get phylosophical with me. you will loose me for sure.
pc

fishfighter

We get a dusting about once or twice every 10 years or so. :D

grouch

Yeah, but fishfighter has to build for skeeter load. You get a flock of those suckers, like he grows 'em, landing on the roof and it may as well be a foot of snow.
Find something to do that interests you.

Darrel

I ain't never been to Louisiana but I have labor ived places in California where the skeeters are that bad. Skeeter Load is a term actually used in the Lasson County building code. :D
1992 LT40HD

If I don't pick myself up by my own bootstraps, nobody else will.

fishfighter

DanG skeeters can get bad at times. As wet as this winter was and maybe only 6 days below 30F, I see they going to be extra bad this summer. :(

I have blood work done once a week, but with the skeeters, that adds about 3-4 times a week. Hope those suckers come down with heart failure too! ;D

Peter Drouin

We have a few skeeters here, they're not out yet, But they don't bother none.

More 12x12x30'


  

 
last 30'.
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

POSTON WIDEHEAD

Peter, do you sell lumber or just collect it?
The older I get I wish my body could Re-Gen.

Peter Drouin

Quote from: POSTONLT40HD on May 11, 2017, 09:38:29 PM
Peter, do you sell lumber or just collect it?




Can't sell a thing with an empty cart. ;D
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

Darrel

Quote from: Peter Drouin on May 11, 2017, 09:06:54 PM
last 30'.

Then just go ahead and sell the bed extension! :D
1992 LT40HD

If I don't pick myself up by my own bootstraps, nobody else will.

Peter Drouin

Quote from: Darrel on May 11, 2017, 10:41:21 PM
Quote from: Peter Drouin on May 11, 2017, 09:06:54 PM
last 30'.

Then just go ahead and sell the bed extension! :D
[/qu




No way, that thing makes me over $100 an hour. :D ;)
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

Peter Drouin

One of those days cutting wood, Busy in the morning and a wege at the end of the day. ::) ::) :D


  

  

 
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

paul case

I believe you is usin werds that I dont know, so I will bite. Is that a weggie or what does wege mean?

It looks like you have been busy.
PC
life is too short to be too serious. (some idiot)
2013 LT40SHE25 and Riehl edger,  WM 94 LT40 hd E15. Cut my sawing ''teeth'' on an EZ Boardwalk
sawing oak.hickory,ERC,walnut and almost anything else that shows up.
Don't get phylosophical with me. you will loose me for sure.
pc

thecfarm

Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

4x4American

Ima guessin that the trucks got wedged in there and they probably had to fight to the death to get out and Peter gets the losers truck.  Pert near close eh
Boy, back in my day..

Peter Drouin

The top board is 1½" on one end, and a ¼" on the other.  ::)
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

Thank You Sponsors!