iDRY Vacuum Kilns

Sponsors:

Makes me feel good.

Started by POSTON WIDEHEAD, December 20, 2011, 12:18:37 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

POSTON WIDEHEAD

My ex-supervisor from the Forest Service bought his Woodmizer back in 1989. This is how I learned about a Woodmizer. This is the reason I bought a Woodmizer.
For 20 years, on and off, he sawed my lumber and I helped as an off bearer.

Now he is in his 80's, has trouble breathing, has trouble with his vision and stumbles when he walks.

Against Doctors orders and family advice he still goes to that old LT40 and fires it up and saws 2 or 4 logs a week.
After sawing he is completely exhausted.

From time to time he calls me and I go over and adjust his chain on his WM or grease the fittings. Last week I took the electric motor off the guide arm and had bearings put in it.

I could "toot" my horn about the things I've helped him do on his WM because of his health. But that's not my point.

My point is I get to see something that is very rare.

Here is an old timer who has never been on the internet in his life, has never touched a computer, does not know what the Forest Forum is, reads about forestry issues from magazines using a magnifying glass, can figure BF numbers in is head so fast it'll make me dizzy and calls his LT40 his baby.

We all talk about the "good 'ol days". Every time I go over to help, I feel the feeling OF "the good 'ol days".

My thoughts: Help an old person, now.  Because one day you will be the old person, before you know it. You'll learn a lot more than you think. And thanks to Woodmizer for giving this 'Ol Timer something to look forward to when he sees the sun come up everyday!

P.S. After all these years,  his old LT40 is no longer orange, it's Walnut Brown.  :)





The older I get I wish my body could Re-Gen.

mad murdock

That is good advice POSTONLT40HD!  I also have a neighbor in his 80's who loves to go in the woods and cut.  This year I helped him put out 8 loads of logs to the mill off his place, and helped him clean up (with my 2 teenage boys help), the 2 acres or so patch we were working in, so he could sell 10 cord of firewood on the side.  I like working with him, and I know that if it were not for is woodlot, and his desire to go out and cut, he would have left us a long time ago.  He had knee surgery recently, and this next spring, I hope I can keep up with him ;) I only hope that when I am that old, I can still get out in the woods and whack down a few trees.  The woods is the best Rx in the world IMO, whether you are cutting trees, or milling lumber, working with wood just has a satisfaction you have to experience, it just is hard to describe for some reason.  Words don't do it justice.  I hope my kids will be around to help out this old guy when I get the hankering to go out to the woods, or mill, and want to make something when I get to be the "age of a tree".  Long live the good ol days, and long live all the old guys!
Turbosawmill M6 (now M8) Warrior Ultra liteweight, Granberg Alaskan III, lots of saws-gas powered and human powered :D

houtwurm

homemade bandmill
stihl ms 441
case 5130 with alo quicke q690 us loader
homemade sawbench

Peter Drouin

Thats why my WM has a chair, so when im 110 I can still cut wood :D :D :D :D :D 8)
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

POSTON WIDEHEAD

I told John about the WM chair. He told me he was scared of going to sleep in that chair and waking up at the end of a cut 3 hours later! :D
The older I get I wish my body could Re-Gen.

Peter Drouin

good one :D :D :D :D :D :D :D :D :D :D :D :D
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

Busy Beaver Lumber

POSTONLT40HD

I can definatey relate to your post. Some of the people that bring the most joy to my life are the old timers I know. They give of their time willingly and it is wonderful when they have a passion in life that keeps them young at heart.

One such fellow who is pushing 70 was in need on a heart transplant and for the longest time it did not look like it was going to happen. As he approached what appeared to be the final roundup, he called his family members together and virtually gave away everything he owned except for his house and truck. Likewise he gave his share of a 40 year old business to his partner whom he worked side by side with for all those years. By the grace of God, and with only weeks to spare, he received a heart transplant and is doing well now health wise.

Unfortunately, once he was given a new lease in life medically, then his problem turned to financial ones. The portions on the medical bills that the insurance company did not pay were bigger than most of us pay in a lifetime. None of the family members offered to return a single thing that he had given them, nor did his partner who took his extra 50% share in the business and basically forgot all about him. At 70 years old, he was basically starting all over but with a huge medical debt to pay on top of that.

You would think he would be angry and bitter, but such is not the case. He has a smile and a good hearted laugh at all times. What little he has, he would give to someone in need without reservation. Rather than be bitter about his partner no returning his share of the business to him, he worked the phone and his contacts and built a new business up from scratch, wheeling and dealing in used machinery of all types.

Some would say he should go out on disability and just sit home every month and wait for the check to come in the mailbox, but that will never be his way of life. It is the passion he has for getting up each day and being productive that keeps him young at heart. I try to get together with him as often as I can as I truly enjoy his company and positive outlook on life. Likewise I try to send him as much business as I can. People like him are an inspiration for us all.
Woodmizer LT-10 10hp
Epilog Mini 18 Laser Engraver with rotary axis
Digital Wood Carver CNC Machine
6 x 10 dump trailer
Grizzly 15in Spiral Cut Surface Planer
Grizzly 6in Spiral Cut Joiner
Twister Firewood Bundler
Jet 10-20 Drum Sander
Jet Bandsaw



Save a tree...eat a beaver!

T Welsh

Learn from your elders! And I think you know he enjoys the time you spend together. Tim

Chuck White

Great post POSTONLT40HD!

If any of you get the chance to buddy-up with an elder who truly enjoys getting out and doing things like sawing logs, cutting fire wood or any other job that resembles a trade or job, just remember the friendship goes both ways and you'll always remember the elder.

I got into sawing logs by helping my FIL on his 1992 LT40G18 manual mill.  He's 75 now and he still runs the ole mill and enjoys it.  Some days he might only saw one or two logs, but he always goes home with a satisfied look on his face.

The key words are RESPECT and ADMIRATION.
~Chuck~  Cooks Cat Claw sharpener and single tooth setter.  2018 Chevy Silverado and 2021 Subaru Ascent.
With basic mechanical skills and the ability to read you can maintain a Woodmizer  LT40!

Magic Smoke


Nomad

POSTONLT40HD 

     Great post, and great replies too.  I enjoy most every minute I get to spend with folks older and wiser than I am; I learn a lot that way.

  Busy Beaver, you could help that old feller out some.  Learn to make voodoo dolls.
Buying a hammer doesn't make you a carpenter
WoodMizer LT50HDD51-WR
Lucas DSM23-19

pineywoods

Quote from: POSTONLT40HD on December 20, 2011, 12:18:37 PM


My thoughts: Help an old person, now.  Because one day you will be the old person, before you know it. You'll learn a lot more than you think. And thanks to Woodmizer for giving this 'Ol Timer something to look forward to when he sees the sun come up everyday!



It's not all sawmills and logging either. There are 5 woodmizers in my neighbohood.  Every one of the owners/operators has seen the 3/4 century mark pass by. The backgrounds of these old timers is absolutely astounding.  Nuclear physics, chemical engineering, pipeline construction, supercomputer specialist, oil well drillers and yes logging and sawmilling .Somewhere along the way, we all got bitten by the sawdust bug  ;D
1995 Wood Mizer LT 40, Liquid cooled kawasaki,homebuilt hydraulics. Homebuilt solar dry kiln.  Woodmaster 718 planner, Kubota M4700 with homemade forks and winch, stihl  028, 029, Ms390
100k bd ft club.Charter member of The Grumpy old Men

beenthere

Quote from: nomad on December 20, 2011, 06:33:53 PM
 

............  I enjoy most every minute I get to spend with folks older and wiser than I am; I learn a lot that way.

  ............

I do to, but the 'older' are harder and harder to find.... ::) ::)
;)
south central Wisconsin
It may be that my sole purpose in life is simply to serve as a warning to others

POSTON WIDEHEAD

Look in the mirror.  :D :D :D :D :D :D
The older I get I wish my body could Re-Gen.

beenthere

 :D :D
I avoid mirrors.  8)
south central Wisconsin
It may be that my sole purpose in life is simply to serve as a warning to others

WH_Conley

I don't like old guys. That is the reason I don't shave. :D :D
Bill

Bill Gaiche

Thanks for the post. It really makes you think how fast the years are passing by. So you just have to make the best of everyday for it may be your last. Spend some with a person that you like to share your works or just a visit with. The time spent is good medicine. bg

zopi

I have always liked hanging out and listening to old guys....alot to be learned.
Got Wood?
LT-15G GO chassis added.
WM sharpener and setter
And lots of junk.

Woodchuck53

Evening all. Happy Holidays. Talking about this, I have been re-reading thru Tom's Old Folks post every chance I get. We can all slow down an appreciate what is rapidly leaving us is a natural treasure. And true to form most of us that have raised our families and now have a lttle disposable income can invest in a hobby or second job are now the old guys. I know I don't feel 56 and my wife says I work harder than any body she knows. We went to one of those class reunions and found out right quick that stopping smoking made a great improvement on my longevity. The guys I played ball with are in bad shape. Some are already gone. I"ll take hard work and cleaner living any day. I get to dad's as often as I can, not as much as I should and he has a lot of old stories also. Take care.
Case 1030 w/ Ford FEL, NH 3930 w/Ford FEL, Ford 801 backhoe/loader, TMC 4000# forklift, Stihl 090G-60" bar, 039AV, and 038, Corley 52" circle saw, 15" AMT planer Corley edger, F-350 1 ton, Ford 8000, 20' deck for loader and hauling, F-800 40' bucket truck, C60 Chevy 6 yd. dump truck.

Brucer

My friend, John, ran a home-made circle mill for years. It was powered off the PTO of his tractor and had a small blade. It could only handle an 11" log -- good for a 6x8 at most, but that was all he needed for his farm. Most of his "commercial" sawing was boxcar dunnage for a local company.

Two years ago John called me in the winter and asked if I could bring my mill out to his place in the spring. He'd fallen out of the loft of his barn and broken his back, his leg, and his pelvis ... and he had a contract with a nearby city to supply the bumper rails on an old bridge. He didn't want to give up the contract, even if he didn't make any money on it. I told John I'd be happy to help him out.

Come the spring, I drove over to John's farm in the next valley. I found him in a body cast, dressing a freshly slaughtered steer with help from his son. He was a bit embarrassed to see me and said he'd decided to buy his own hydraulic Wood-Mizer and saw up the logs himself. He'd meant to call me but hadn't got around to it.

I think John was worried that I'd be ticked off, but it didn't bother me. He has his own market and I've got mine and we never end up competing. In any event, I told John to drop by my mill any time he had a question. Since he drives by my site on the way to town, he often does stop by and we swap information. He can still read a log better than I can, and I know more about the quirks of operating a Wood-Mizer.

John was 76 when he bought his WM, and shows no sign of slowing down  ;D.




Bruce    LT40HDG28 bandsaw
"Complex problems have simple, easy to understand wrong answers."

bandmiller2

It is the folly of youth to put down old men and old machinery.Everything I've learned thats worthwile I've learned from old timers. Frank C.
A man armed with common sense is packing a big piece

tractormanNwv

Goes to show...no matter how smart you think you are, there's always something to be learned if you just listen.

Jim

Thank You Sponsors!