iDRY Vacuum Kilns

Sponsors:

Efco 158

Started by saw_nut, August 16, 2011, 07:23:14 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

saw_nut

Working on an Efco 158. Putting a 156 cyl on a 165 case. The 165 has a 1 mm longer stroke. That makes the saw almost 59cc. Squish with stock gasket is .020.

saw_nut


Warbird


ladylake


Cuts good but that wood is punky.  I like to see saws cut in good wood.  Steve
Timberking B20  18000  hours +  Case75xt grapple + forks+8" snow bucket + dirt bucket   770 Oliver   Lots(too many) of chainsaws, Like the Echo saws and the Stihl and Husky     W5  Case loader   1  trailers  Wright sharpener     Suffolk  setter Volvo MCT125c skid loader

saw_nut

Quote from: ladylake on September 05, 2011, 06:50:00 PM

Cuts good but that wood is punky.  I like to see saws cut in good wood.  Steve

I agree but thats all that was left in the yard. When the tractor comes home I will get a good stick of maple.

In a month I have to take down an oak for Dad. It is 4 feet across, will video the 158 in that.

Thank You Sponsors!