iDRY Vacuum Kilns

Sponsors:

Toothing blade

Started by carheir, July 07, 2011, 10:41:49 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

carheir

New member, need help.

While searching for a toothing blade, I ran across this forum and saw a picture of a toothing blade in a thread on the subject.  What I am looking for is a source.  Lee Valley, LN, Hock don't have what I am looking for but the one pictured in the thread looks like it would work.  The plane is a wooden toothing plane and the current blade sucks.  I cannot get the blade honed flat across its surface and it ends up with a curve in the center of the blade.  Hence, the outside edges dig in and the center doesn't touch the surface.  So, any help would be greatly appreciated.

low_48

Found one here, kinda pricey.
http://search.3riversarchery.com/search?w=toothing+plane+blade

and another reference
http://www.fine-tools.com/G301211.htm

Appears to be a replacement iron for an E.C.E. wood hand plane

Highland Hardware sells the plane but didn't see a replacement iron. Maybe get a hold of them for pricing.
http://www.highlandwoodworking.com/ecetoothingplane.aspx

Thank You Sponsors!