iDRY Vacuum Kilns

Sponsors:

circle mill sawdust chain

Started by woodpeckerlips, April 14, 2010, 12:57:43 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

woodpeckerlips

i recently got my mill all running. was a flat belt, converted to v-belt.  (frick00)  was still working on the chain conveyor and was convinced i wanted it all under the mill. still needed a short shaft bearings and some other misc stuff to install it.  didnt want to do the whole loop over the mill like most i"ve seen.   anyway, i was at a auction. there was a grain elevator 32' long that no one seemed to want. it was brand new never used. i got it for $350.   went home shoved it under the mill and it works like a champ> it works awsome. i put a large sheet metal cup under the mill to funal all the chips to the conveyer. it takes everything out to a road behind the mill and piles it up for me!!!!!!!!! 

mad murdock

sounds like some good ol' american ingenuity at work!  good stroke there WP lips! 8) 8) 8)
Turbosawmill M6 (now M8) Warrior Ultra liteweight, Granberg Alaskan III, lots of saws-gas powered and human powered :D

Thank You Sponsors!