iDRY Vacuum Kilns

Sponsors:

Bring enough truck... and trailer!

Started by scsmith42, April 19, 2009, 08:34:14 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

scsmith42

I ran across this photo and link... methinks that someone just learned a very expensive lesson  :D



As near as I can estimate the log weighs around 6 tons, and it's loaded (incorrectly I might add - not centered over the axle's) on a trailer with a net payload capacity of probably around 6,500 lbs (5 lug wheels / 4K axles).

http://www.greatlakes4x4.com/showthread.php?t=131287
Peterson 10" WPF with 65' of track
Smith - Gallagher dedicated slabber
Tom's 3638D Baker band mill
and a mix of log handling heavy equipment.

metalspinner

Alright....

Who was it?  Come on guy's... fess up. :D
I do what the little voices in my wife's head tell me to do.

Jeff

I think everyone here probably knows better, and if they don't they know enough to hide it.  :D

I'd lay half of the blame on the guy running the loader. He must have dropped that log to bend the truck like that. Apparently there was total group ignorance involved.
Just call me the midget doctor.
Forestry Forum Founder and Chief Cook and Bottle Washer.

Commercial circle sawmill sawyer in a past life for 25yrs.
Ezekiel 22:30

fishpharmer

Built my own band mill with the help of Forestry Forum. 
Lucas 618 with 50" slabber
WoodmizerLT-40 Super Hydraulic
Deere 5065E mfwd w/553 loader

The reason a lot of people do not recognize opportunity is because it usually goes around wearing overalls looking like hard work. --Tom A. Edison

Reddog

I agree Jeff, shared brain cells there. :D

What I want to know is, how did he plan to unload it when he got home.  ???

Tim L

unstrap it and drive quickly in circles until it rolls off,taking down the neighbors garage.He can then saw it into boards for said garage!
Do the best you can and don't look back

DanG

Quote from: Jeff on April 19, 2009, 09:42:56 AM
Apparently there was total group ignorance involved.

I was thinkin' the same thing!  Anybody that would do something like that had no business with a chainsaw in their hand, let alone laying it to a tree that size!

I once retrieved an 8-ton oak log with a F-350 dually and 10-ton gooseneck trailer, and it was still dicey.  I've seen some pretty gross overloads from some of our membership here, but I don't think any of us have smushed a truck AND trailer with one stick. :D :D
"I don't feel like an old man.  I feel like a young man who has something wrong with him."  Dick Cavett
"Beat not thy sword into a plowshare, rather beat the sword of thine enemy into a plowshare."

WH_Conley

If so, at least we are smart enough not to admit it, especially show the evidence. :D :D
Bill

easymoney

that is like biting off more than you can chew. :D

schmism

http://www.greatlakes4x4.com/showthread.php?t=131287

posted over on TBN... though you guys would appreciate the log.


039 Stihl 010AV  NH TC33D FEL, with toys

sharp edge

Fish
You have to be careful here. Now a forumenite will take a Ford, load it down and bend it up. I know how things work here. ::)

SE
The stroke of a pen is mighter than the stroke of a sword, but we like pictures.
91' escort powered A-14 belsaw, JD 350-c cat with jamer and dray, 12" powermatic planer

MaddiesDad

Wow.... I can't imagine how that even sounded like a good idea.  I'd guess that loader's rated at 15,000 lbs.  So I'd guess that log at slightly less then that.

Dan_Shade

it happens....

wonder if the log was "dropped" or "placed".... with the forks, I'd guess "dropped".
Woodmizer LT40HDG25 / Stihl 066 alaskan
lots of dull bands and chains

There's a fine line between turning firewood into beautiful things and beautiful things into firewood.

fishpharmer

Quote from: sharp edge on April 19, 2009, 01:16:55 PM
Fish
You have to be careful here. Now a forumenite will take a Ford, load it down and bend it up. I know how things work here. ::)

SE

I know, I own a couple of each brand, the timing just seemed right for that comment.   ;D

I'll be the one to mess up my Ford with my big cypress log. Hope not.
Built my own band mill with the help of Forestry Forum. 
Lucas 618 with 50" slabber
WoodmizerLT-40 Super Hydraulic
Deere 5065E mfwd w/553 loader

The reason a lot of people do not recognize opportunity is because it usually goes around wearing overalls looking like hard work. --Tom A. Edison

fishpharmer

Built my own band mill with the help of Forestry Forum. 
Lucas 618 with 50" slabber
WoodmizerLT-40 Super Hydraulic
Deere 5065E mfwd w/553 loader

The reason a lot of people do not recognize opportunity is because it usually goes around wearing overalls looking like hard work. --Tom A. Edison

ohsoloco

He just needed a trailer jack with one of those little plastic wheels on it.  That would've supported the tongue and still let him drive down the road  :D

bck

 " yes my trailer will hold it "   At least the trailer looks like it held up ok  :)


ErikC

  Yesterday I hauled a few nice 16' pine logs in a 10' dump trailer. It was heavy and a little bouncy, but I went slow. Feel just fine about it now though ;D
Peterson 8" with 33' tracks, JCB 1550 4x4 loader backhoe, several stihl chainsaws

ScottAR

I'm having flashbacks from my old job at the home center...   :D

"It will haul it" was heard and disproved often... ::)
Scott
"There is much that I need to do, even more that I want to do, and even less that I can do."
[Magicman]

customdave

It's not all lost, he can finish cutting chevy in half & make a nice trailer ;)
Love the smell of sawdust

LeeB

Yea, but it would still be a chevy.  ::)  :D
'98 LT40HDD/Lombardini, Case 580L, Cat D4C, JD 3032 tractor, JD 5410 tractor, Husky 346, 372 and 562XP's. Stihl MS180 and MS361, 1998 and 2006 3/4 Ton 5.9 Cummins 4x4's, 1989 Dodge D100 w/ 318, and a 1966 Chevy C60 w/ dump bed.

mike_van

OOWWW!!!!!!  :o  Centered & balanced on the trailer, he mighta had a chance, as long as there were no big hills or sudden stops on the way home. The way it was loaded though, no way -
I was the smartest 16 year old I ever knew.

Warbird

Quote from: customdave on April 20, 2009, 06:11:47 AM
It's not all lost, he can finish cutting chevy in half & make a nice trailer ;)

Yup!!





;)

OneWithWood

A Forvolet! 

Doesn't get any better than that  8)
One With Wood
LT40HDG25, Woodmizer DH4000 Kiln

easymoney

looks natural. a ford pulling a chevy. :)

Thank You Sponsors!