iDRY Vacuum Kilns

Sponsors:

Building a kiln

Started by peterduncan, February 25, 2009, 06:38:45 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

peterduncan

February 25, 2009, 06:38:45 PM
We are planning to build a kiln using a truck "can" body. We are incorporating a large wood burning stove in the unit and need to also build a steam boiler unit in it as well. We would like to run a couple of steam fans at the same time. Does anyone have any plans or input to use in our project?

Ironwood

#1
February 26, 2009, 11:32:34 PM
No plans but I wil say my mistake was to front load mine via a forklift, instead of having some rails and a staging area fore and aft. I will soon have a TON of kiln wheel assemblies available for sale. I am going to build another kiln building w/ 20' of stacking area on the "infeed" side and another 20' on the "outfeed" side. As a small shop this will help me w/ the everpresent weather issues associated w/ transitioning between loads.

IMHO, Ironwood
There is no scarcity of opportunity to make a living at what you love to do, there is only scarcity of resolve to make it happen.- Wayne Dyer
Print
Go Up Pages1
User actions

Thank You Sponsors!