iDRY Vacuum Kilns

Sponsors:

Adding a Debarker?

Started by chep, November 05, 2008, 11:46:57 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

chep

I have been doing some part time sawmilling for a few years (with the owner) on an early 80's Board Bandit, bandsawmill, run by an 11 horse honda. the whole mill is manual, everything. But we get around on it pretty well and can do about 800-1000 bf a day.  recently i got to use a wood mizer, couple years old, computer & manual set works, hydrolics, you name it. It was neat, but the only thing I was really taken by was the debarker. It sure beats out our double bit axe, even the old log wizard.... saves a lot of time and blades, the question is, can the board bandit be fitted with a debarker? Makes, models, modifications and prices would be helpful
thanks

york

chep,

i already looked into this-talked to the WM,pa rep. and he says the WM mudsaw has to have a 40 amp. breaker-so i have to forget about there mudsaw-to bad theres works very good....bert
Albert

Thank You Sponsors!