iDRY Vacuum Kilns

Sponsors:

This is way off topic but.....

Started by Bill Johnson, July 11, 2001, 06:47:00 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

Bill Johnson

In our little piece of heaven we are just wrapping up a volunteer project building rink boards for a 40'x100' outdoor rink.
The panels and supports are all done, the other night one of the fellows managed to get a boom truck with an auger so we put up 6 35' poles to mount lights on.
Now we decided we want to build a rink shack, the problem is we (I) need a set of plans for a building approximately 12'x16' complete with a material list so we can try and solicit support and supplies. The local sawmill gave an excellent deal on materials for the boards and if we can give a material list and plans may do the same for the shack.
Does any one have a set of plans or specs they can e-mail.
No the ice isn't in yet :D though it might be possible shortly.
Any help would be appreciated.

Bill
 8)
Bill

Kevin

Bill,
Your lumber store should have the plans,if not  they can be puchased for about $15 US., probably close to $20 CDN.
Our lumber stores here have them in stock.

Jeff

Just call me the midget doctor.
Forestry Forum Founder and Chief Cook and Bottle Washer.

Commercial circle sawmill sawyer in a past life for 25yrs.
Ezekiel 22:30

Bill Johnson

Thanks guys
I'll find out tomorrow if we are going to build the rink shack.
We are putting the boards up tomorrow morning and hope to have it done before the rep from Molson's gets there to see how well we did, theres also a bbq planned for the volunteers and everyone else in town.
Hot time in Dobie tomorrow 8) 8)
Bill
Bill

Thank You Sponsors!