iDRY Vacuum Kilns

Sponsors:

White Oak Deck Boards

Started by fstedy, February 01, 2006, 04:01:02 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

fstedy

February 01, 2006, 04:01:02 PM
What sizes are you folks cutting decks boards and what prices are you charging per BF?
Timberking B-20   Retired and enjoying every minute of it.
Former occupations Electrical Lineman, Airline Pilot, Owner operator of Machine Shop, Slot Machine Technician and Sawmill Operator.
I know its a long story!!!

Bibbyman

#1
February 01, 2006, 04:47:13 PM
What ever the customer wants and as much as we can get!
Wood-Mizer LT40HDE25 Super 25hp 3ph with Command Control and Accuset.
Sawing since '94

Dangerous_Dan

#2
February 01, 2006, 08:27:48 PM
What's up Edy?
The "factory" thickness on small equiptment trailers is 1.5 inch.
Bigger trailers like a 20 ton tag trailer or low boy deck are 2 inch.
I usually cut them at 6 inch wide or 12 inch wide. Most spacing seems to be 6 inch incriments.
$1.50 a bdft and up.
First you make it work, then you trick it out!

woodmills1

#3
February 01, 2006, 08:30:38 PM
I was at $1.25 for a long time but went to $1.50 now, even bumped my pine to 60 cents, everything is so much more expensive.  Funny though the hardwood market report has oak FAS green down to $1.13, in a slump it says.
James Mills,Lovely wife,collect old tools,vacuuming fool,36 bdft/hr,oak paper cutter,ebonic yooper rapper nauga seller, Blue Ox? its not fast, 2 cat family, LT70,edger, 375 bd ft/hr, we like Bob,free heat,no oil 12 years,big splitter, baked stuffed lobster, still cuttin the logs dere IAM
Print
Go Up Pages1
User actions

Thank You Sponsors!