The Forestry Forum

Sponsor News => WoodMaxx Blades from KASCO SharpTech => Topic started by: LeeB on September 22, 2017, 02:57:16 am

Title: Ordering Kasco Blades
Post by: LeeB on September 22, 2017, 02:57:16 am
I had thought I might order some Kasco blades and give them a trial so I clicked the ling on the left of the page. So far so good. Problem is now that I look at the web site I see they offer several different configurations but when I go to the blade section to order online I only see an offering for 7* and 10* in .042 and .055. Where do I order other configurations from?
Title: Re: Ordering Kasco Blades
Post by: plowboyswr on September 22, 2017, 04:49:52 am
Contact member Cuttingedge he can help you.
Title: Re: Ordering Kasco Blades
Post by: btulloh on September 22, 2017, 06:57:08 am
Some stuff you just order by phone.
Title: Re: Ordering Kasco Blades
Post by: Jeff on September 22, 2017, 07:46:18 am
You can contact Kasco directly so they know their presence here is truly productive.

On the Kasco sponsor board you will see two names listed as moderators. They are both Kasco Factory Reps. BVC and Sawman815
Title: Re: Ordering Kasco Blades
Post by: LeeB on September 22, 2017, 08:06:25 am
I actually contacted Richard (cutting edge) and took care of it through him.
Title: Re: Ordering Kasco Blades
Post by: Sawman815 on September 22, 2017, 11:57:04 am
I had thought I might order some Kasco blades and give them a trial so I clicked the ling on the left of the page. So far so good. Problem is now that I look at the web site I see they offer several different configurations but when I go to the blade section to order online I only see an offering for 7* and 10* in .042 and .055. Where do I order other configurations from?
The best way to order blades is to contact one of our distributors. Although we have a website that has some of our blades on it has never been our intention to sell that way. Also you will probably find that our distributor can sell you the blades at a lower cost.
Please visit our news page and see the .pdf of our blade profiles.
http://www.forestryforum.com/board/index.php/board,91.0.html

Currently we do have an active distributor on this site that represents our blades.
Cutting Edge Saw Service aka "Cutting Edge" on the forum. He has been an excellent resource for sawyers needing advice on blades.
To order blades contact him at 304-878-3343 or PM myself, go to our website https://www.kasco.com/ and fill out an inquiry form, or call 1-877-366-1696.

We will do our best to make sure you get the blades you need.
Title: Re: Ordering Kasco Blades
Post by: LeeB on September 22, 2017, 12:38:54 pm
I did indeed contact Richard and now have a box of 7's on the way along with a 7* cam kit. While everyone else is moving to the 4* blades I'm only just now trying the 7's. I had previously been using WM 9's although in reality they were 8's after the first sharpening on my Cooks.
 Now I just need to get back home so I can try them out.
Title: Re: Ordering Kasco Blades
Post by: Seaman on September 22, 2017, 04:25:58 pm
Richard at Ciutting Edge has always done me better than right! I highly recommend his sharpening service.
Just last week he found a problem with a box of Kasco blades which I sent him to sharpen. I had a new box on the porch TWO DAYS later. Could not be happier.
Frank
Title: Re: Ordering Kasco Blades
Post by: scsmith42 on September 22, 2017, 07:58:28 pm
I'll jump in with my support for CuttingEdge (Richard).  I learned a tremendous amount about blade design from him at Jake's get together earlier this year, and he custom ground some 4 degree bands for me to try out.

Super guy.
Title: Re: Ordering Kasco Blades
Post by: drobertson on September 22, 2017, 09:36:32 pm
I did indeed contact Richard and now have a box of 7's on the way along with a 7* cam kit. While everyone else is moving to the 4* blades I'm only just now trying the 7's. I had previously been using WM 9's although in reality they were 8's after the first sharpening on my Cooks.
 Now I just need to get back home so I can try them out.
So glad you got it in motion, and I will say I will find it hard to believe that you are not well pleased, my biggest like to these blades are the way they handle resharpening. Well,fact is hands down these blades just rock,,not much else to say, they saw and they last,,,,
Title: Re: Ordering Kasco Blades
Post by: coppolajc10 on September 22, 2017, 10:42:03 pm
I've sent my first box off to Richard based on reviews from this forum. I've exchanged numerous emails with him and have spent a generous amount of time on the phone discussing bands. He's professional, polite, and a genuinely good guy looking to help others get issues resolved. Can't wait to get this box of bands back from him and get to sawing some hickory.
Title: Re: Ordering Kasco Blades
Post by: gmmills on October 01, 2017, 11:09:29 pm
I have been a customer of Cutting Edge, Richard, for a number of years now.  He is not only just a factory direct Kasco blade distributor and a blade sharpening service. He also custom saws logs on his own mill using the blades he sells and sharpens. Doing so gives him the ultimate insight in blades and their performance. This allows him to give advice based on real world sawing experience, not just a company representative spouting advice from a company mandated print form info sheet. For those of you out there that are frustrated with your mills blade performance and need another source to help end your frustration, give him a call.  He is all about helping his customers with overall integrity that is beyond reproach.   
Title: Re: Ordering Kasco Blades
Post by: 69bronco on October 02, 2017, 06:28:50 am
X2^
Title: Re: Ordering Kasco Blades
Post by: Crusarius on October 03, 2017, 12:34:39 pm
I want to order a sampler pack :)

I should do that before I finish building my mill cause I have this terrible feeling the first log is going to be all metal. and the 1 blade I have will not last me very long.
Title: Re: Ordering Kasco Blades
Post by: MbfVA on October 09, 2017, 12:57:56 pm
I need to order blades for a friends mill, sent a private message a few days ago to Cuttingedge, wondering if it got thru.