The Forestry Forum
General Forestry => Timber Framing/Log construction => Topic started by: martinkj27 on September 07, 2017, 06:04:40 PM
Hi all!! This site has a lot of great info. I have built many post & beam cabins, lawn sheds & lean-to's, but want to dive off into the world of timber framing. I have a plan to build a lean-to in our woods for the family to enjoy. Below is the picture that inspired my design. I plan to use ash timbers and larch decking & siding. I am in the northeast and the ash bore beetle has moved thru the area hitting the ash trees pretty hard. I thought it would be great to have a structure made of ash to preserve and show my young daughters what a great wood ash was. I predict that in 20 years most will have forgotten about ash in our area. And it is a beautiful wood to boot. I plan to cut the logs this fall and saw the timbers oversized over the winter. Stack them to air dry for a year (hopefully only one) then re-saw them to size.
(https://forestryforum.com/gallery/albums/userpics/46907/IMG_1160.JPG?easyrotate_cache=1504820314)
I have many questions but the one I am trying to figure out today is would it be better to design the frame like I have pictured below with only the two end bents and a ridge pole? Or would four bents with horizontal purlins?
What made me think of this is if I build four bents, I will only need two 16' beams for the long sills. If I build it as pictures I will need a few more 16' beams.
Again, the foot print is 10'x16' with a 3' ash back wall and 6-7' head room under the front tie beam.
I may be putting the cart before the horse, if you think so i appreciate consecutive criticism.
(https://forestryforum.com/gallery/albums/userpics/46907/21198131_10154606202375947_1955129977_o.jpg?easyrotate_cache=1504820495)
Thanks!
Marty
Welcome to the forum, Martin.
This link might be helpful--my woodshed is smaller (about 8x14), but somewhat similar in design:
https://forestryforum.com/board/index.php/topic,83856.msg1280895.html#msg1280895
Quote from: Brian_Weekley on September 07, 2017, 07:30:37 PM
Welcome to the forum, Martin.
This link might be helpful--my woodshed is smaller (about 8x14), but somewhat similar in design:
https://forestryforum.com/board/index.php/topic,83856.msg1280895.html#msg1280895
Thanks Brian! Thats a nice wood shed. I will concider that type of rafter/truss design for my build.