The Forestry Forum

Sponsor News => Lucas Mill => Topic started by: xlogger on March 21, 2017, 07:10:30 AM

Title: log clearance height
Post by: xlogger on March 21, 2017, 07:10:30 AM
On the Lucas Mills how much height do you have if you raise the slabbing blade as high as it goes to the ground?
Title: Re: log clearance height
Post by: Lucas_USA on June 14, 2017, 10:13:45 AM
Hi Xlogger,

Your maximum log size on the dedicated slabbers would be either 60 or 76 inches for the smaller two models. However on some logs you will need to block up the end frames to get the max cut. Ill grab a tape the next time I have one set up. I can tell you the DSM endframes are 5 or 6 inches higher than the swing mills endframes to accommodate the larger logs.