Author Topic: New Wood-Mizer mill stolen Near NC-TN line (Read 3662 times)

Jasperfield · « **on:** January 17, 2012, 09:25:36 pm »

When I drove to the lower end of the farm, this evenin', and saw the lock to the gate cut off I knew it was not good.

They got my brand new two-hour WOOD-MIZER LT40HDG28 out of the barn. Jacked it down onto the tires and left. SERIAL NO. 456 B424 189 NKK 5872.

This is the second time in three years I've been hit. The total is now over $55K.

Dan_Shade · « **Reply #1 on:** January 17, 2012, 09:27:54 pm »

wow, best of luck with recovery, and to the sheriff on finding a rope for the culprits

ely · « **Reply #2 on:** January 17, 2012, 09:29:46 pm »

i think you should invest in brass and lead, a new long range injection system will help things too.

isawlogs · « **Reply #3 on:** January 17, 2012, 09:35:25 pm »

No words to express my feelings right now ... well there are some but I would be

rockman · « **Reply #4 on:** January 17, 2012, 09:45:31 pm »

There is a special place in a very hot place, for people who do stuff like that, I hope that you catch up with them before the police do.

Kevin

WDH · « **Reply #5 on:** January 17, 2012, 09:46:04 pm »

Let us sit on the Jury.

POSTONLT40HD · « **Reply #6 on:** January 17, 2012, 09:47:33 pm »

I'll record the serial # and put an APB out for it through the S.C. Forestry. You never know!

Hope it shows.

Magicman · « **Reply #7 on:** January 17, 2012, 10:18:49 pm »

I am so sorry. Words can not express the disgust that I feel. $:-\$

Woodwalker · « **Reply #8 on:** January 17, 2012, 10:34:37 pm »

Quote from: WDH on January 17, 2012, 09:46:04 pm

Let us sit on the Jury.

I really don't see the need for one.

zopi · « **Reply #9 on:** January 17, 2012, 10:40:07 pm »

Owwtch. I feel for you. Country needs more thieves shot.

I can see my mill from the bedroom window amd have taken to locking the hitch and chaining the frame to the mill shed's timbers.

Jasperfield · « **Reply #10 on:** January 17, 2012, 11:12:21 pm »

Thanks for the support, fellows. Getting through the frustration is going to be tough.

I'll contact WM tomorrow and alert them.

I suppose the mill is now in a trailer or headed to a container to be shipped. A fellow 10 miles down the road from me lost a Kubota tractor along with lots of tools just about 10 days ago.

Jasperfield

Buck · « **Reply #11 on:** January 17, 2012, 11:23:32 pm »

As far as I know each state has enforcement thru the forestry dept. I know our guys stay busy. Dave, do you know if they communicate like ncic? It would be cool if a bolo could go out to each state like normal police agencies.

Chuck White · « **Reply #12 on:** January 18, 2012, 05:41:12 am »

I'm almost at a loss for words!

It's really hard to believe that anyone would steal something such as a sawmill!

My feelings are somewhere between $:-\$ and

on this one.

I really hope they find the culprits. They should hang for this one!

WH_Conley · « **Reply #13 on:** January 18, 2012, 06:14:30 am »

Be sure local law enforcement put it on NCIC and LINK.

POSTONLT40HD · « **Reply #14 on:** January 18, 2012, 07:27:08 am »

Yes....it will be put in NCIC. Whoever has this saw, just a guess, will probably hide it hoping the heat will drop.
They could even have plans to part it out. So be watching E-BAY AND CRAIG'S LIST for a rise in parts.

Kansas · « **Reply #15 on:** January 18, 2012, 07:47:00 am »

One thing you might do is notify the local salvage yards to watch for anything orange coming in. Its not outside of the realm of possibility. As awful as it sounds, they might well just cut it up and sell it for junk iron for quick cash for a meth or crack habit.

Ivey · « **Reply #16 on:** January 18, 2012, 08:34:56 am »

Sorry to hear about this Jasperfield, I will keep eyes and ears open also!

thecfarm · « **Reply #17 on:** January 18, 2012, 08:40:52 am »

I'm just about to head for the NC-TN eat a some grits and go.........I think I better stop right there. I'm so sad to hear of this. This and hurting kids are just about the only thing that really gets me going.

Meadows Miller · « **Reply #18 on:** January 18, 2012, 08:51:22 am »

I feel your Pain Mate I had My bandmill stolen just on ten years ago between xmass and new years and aint heard nothing about it since there was only a handfull of the in Australia too Im still abit a bit ticked off with it

paul case · « **Reply #19 on:** January 18, 2012, 09:12:29 am »

I feel your pain.
http://www.forestryforum.com/board/index.php/topic,45272.msg651207.html#msg651207

I have had stuff dissapear too.
Good luck with recovery efforts. PC

News:

Author Topic: New Wood-Mizer mill stolen Near NC-TN line (Read 3662 times)