Author Topic: Kids stole saw mill (Read 1708 times)

captain_crunch · « **on:** January 07, 2012, 11:55:49 pm »

Meadows Miller · « **Reply #1 on:** January 08, 2012, 06:40:57 am »

Gday

Thats what I like to see Kids doing something productive there aint nothing wrong with alittle hard work (if we could call it that

) is there Mate

Regards Chris

dgdrls · « **Reply #2 on:** January 08, 2012, 06:57:46 am »

Vinny: Is it possible, the two utes...
Judge: Eh, the two what? Uh, uh, what was that word?
Vinny: Uh, what word?
Judge: Two what?
Vinny: What?
Judge: Uh, did you say 'Utes'?
Vinny: Yeah, two utes.
Judge:What is a ute?
Vinny: Oh, excuse me, your honor. Two YOUTHS.

DGDrls

Meadows Miller · « **Reply #3 on:** January 08, 2012, 07:15:45 am »

Thats ones always made me laugh Mate

bandmiller2 · « **Reply #4 on:** January 08, 2012, 07:25:23 am »

Well Cap, at least you know where they are.Hope they know how to file the bits. Frank C.

Meadows Miller · « **Reply #5 on:** January 08, 2012, 07:39:20 am »

DAD !!!!!!!!!!!

Magicman · « **Reply #6 on:** January 08, 2012, 08:11:55 am »

Looks like the Crunch Bunch works well together. It doesn't get any better than that.

snowshoveler · « **Reply #7 on:** January 08, 2012, 08:43:00 am »

Every time I look at Crunchy's mill pic's it seems like a different mill all together.
I am putting together a belsaw and look at his mill for ideas. Well he has a lot of good pic's and thats awesome.
Now I am getting ready to put some sort of roof on it and these new pic's help a lot.
Only thing is it seems that Crunchy's mill changes layout about every second week.
I can't keep up to him,he is too fast.
Chris

Dave_ · « **Reply #8 on:** January 08, 2012, 12:23:28 pm »

Looks like Captian is legging out his new camera

Keep those pics coming!

captain_crunch · « **Reply #9 on:** January 08, 2012, 12:45:17 pm »

sure is amazeing what they can accomplish ifn they want boards

shelbycharger400 · « **Reply #10 on:** January 08, 2012, 01:13:05 pm »

captin crunch... pm me a picture or 2 on how or what their is to be for the linkage for the saw depth gauge. my belsaw, the cast iron indicator is their, their is a bit of a loop on the top of the stick, but nowhere is their anything of an indication of what is to be their, cable or spring or anything .

captain_crunch · « **Reply #11 on:** January 08, 2012, 10:40:27 pm »

will get some tomorrow all I can figure with mine for sure is how much is left in cant

this is what we use roller on crank with scale above it it is set on 6 1/2 in pic. When set you just pull cant on board to wheel and go

thecfarm · « **Reply #12 on:** January 09, 2012, 07:15:57 am »

Don't call the sheriff.

Lambee10 · « **Reply #13 on:** January 11, 2012, 01:02:34 pm »

Snowshoveler: I agree with you on his mill. he has been very helpful to me to get my belsaw up and running but every time I look at his picts I see something new (or different). very cool set up.

I found my guage lying on the ground when I pulled my belsaw out of the woods. I cleaned it up and reinstalled it. It had a piece of cable still stuck in the small tubes/guides (you called it a loop I think, Shelby) that I used to size a replacement. I got it Calibrated

so I can pull a cant and cut but I still want to get a roller like he has set up.

snowshoveler · « **Reply #14 on:** January 11, 2012, 04:50:15 pm »

Lambee10
I have spent countless hours looking at pictures and reading how mills are setup and used.
Each person explaining how he did each modification and how helpfull it was.
Captain in particular has some very good pics and I almost understand how his mill works.
His next project should be a how to book for Dummies like me.
Would be first in line for sure.
Chris

shelbycharger400 · « **Reply #15 on:** January 11, 2012, 04:50:57 pm »

it will be a while before i set the belsaw back up. im still working on my portable.

captain_crunch · « **Reply #16 on:** January 13, 2012, 12:03:26 am »

Guys
To be honest without Duane i would still be schraching me head

Not sure what Jered (son running mill in first part of post) and Duane are discussing but looks like fish story

Me just gaurding Tractor waiting fer out come

captain_crunch · « **Reply #17 on:** January 16, 2012, 11:31:43 pm »

Here are pics of Gauge

Think took wrong turn back at Fairbanks

Dave_ · « **Reply #18 on:** January 17, 2012, 11:39:25 am »

I see you got some of that white stuff too. As dry as it has been, I guess we'll take moisture in any form!

Lambee10 · « **Reply #19 on:** January 17, 2012, 02:28:59 pm »

Your gauge is a bit different from mine. front is the same but the wheel in the rear is different. I will try to get some picts posted with it.

News:

Author Topic: Kids stole saw mill (Read 1708 times)