disposable saws?

[old2stroke]

A friend dropped off the engine from a toasted Poulan.  I’m not sure what model it is (just got the cylinder and crankcase) but according to my measurements it’s a 38cc engine.  When I took it apart I found a piston with only one ring, a connecting rod that looked like it had just been punched out of some flat stock, and a cylinder bore with no sign of chrome plating.  What was more surprising was the transfer ports were formed by pressing steel inserts up from the bottom of the barrel and the inserts weren’t even flush with the cylinder walls.  How far up the Poulan food chain do you have to go to get an engine that is designed to last for more than a few hours and are other manufacturers out there producing these “Christmas gift” saws?

[Al_Smith]

They've just about all made less than well built saws .Poulan did make some good ones although for some reason they never get mentioned .

I'd say from my observation that a majority of these sized lower priced saws are not quality built tools .

Now while some of the more familiar brands of saws which have the reputation of quality and touted by the proud owners of same on forums are less than anticipated in the long haul .It's kind of like compairing a Cadillac to a Yugo .

[Corley5]

Friends of mine build log homes and use cheap Poulan saws from Walmart.  When one breaks they throw it in the dumpster and buy another.  Worked for them for years 

[Al_Smith]

Well yeah ,you can do that .Years ago on trim saw the trimmers would buy either a mini Mac or a Homelite xl super for about 100 bucks and maybe get two years out of it if that .The first time it layed down on them it got assigned to the shelf and they bought another .The cost of repairs exceeded the value of the saw .

As odd as it might sound in those days the Poulan s-25 was the best trim saw money  could buy .Strange perhaps to some but a majority of those models are still operational today including the two in my shed .One of them finally just a month ago after 35 years  needed carb rebuild .

[fuzzybear]

well it is a vacuum cleaner with a chain.  Poulan is now made by electro lux, a vacuum cleaner company.
 I had my only saw go down a couple of years ago and was forced to buy a "wild thing" to finish out the orders I had. It ran good for a while then the oiler broke. I still use it for a stump saw.
 

Friends of mine build log homes and use cheap Poulan saws from Walmart.  When one breaks they throw it in the dumpster and buy another.  Worked for them for years 

   I have friends that do the same thing but with the Husqvarna 340. When the oiler breaks they toss it into a pile and buy a new one. The dealer wants $150 to replace the oiler, add $.54 a drive link for chain, and $90 for a new bar. Cheaper to buy a new disposable saw.
   Personally I buy quality saws and only buy a POS when I have no other option, then it becomes a slashing/stump saw until I kill it all together.
FB

[Al_Smith]

Well there you go .Firstly in the Yukon most likely everything is sky high .

Even in the middle of the big corn field in Ohio you're going to shell out 50-60 bucks an hour at a dealer plus have parts marked up about twice what they're worth .In some cases ,Stihl you have no choice  .

Often times repairs are quoted from a "flat rate book " which in most times figures things pretty heavy in favor of the dealer .The price is  astounding for the owner who often just buys a new saw in it's stead and the dealer gets the old one by not charging for the trouble shooting .

The oldie ends up in the dead pile then guys like me pick them up for pennys and get them running for next to nothing .The dealer sold it for cash so he's happy ,I'm happy and the former owner never hears a peep about it .Fact he could care less unless his new saw quits on him .

[beenthere]

fuzzy
So a stump saw doesn't have to run well?

[islandlogger]

I've really only had a one time experience with "Pulling on the Poulan" back in early 90's was helping a buddy log off his land, beutiful stand of big 2nd growth Dougs and Western Reds. I was mostly running my 044 and 066 but my buddy shows up one day with a Poulan he bought on sale at K-Mart or some such place, cant even remember what model it was and I must admit after I got done poking fun at him we tryed everything we could think of to see if we could kill that saw and be danged if it just kept on pulling chips! It was always harder then 'eck to start (pulling on the poulan!!) but once it fired off that little Green and Black machine was ready to go! We had a good time with it...my buddy got hurt shortly there after (massive brain trauma never was the same man) and had to sell everything to cover his medical bills, last I saw of that Poulan it was sold to a drunk cord wood cutter down the way...I think he finely managed to kill it after he forgot where he left his saws and dumped a truck load of wood on it and then let the pile of wood sit for the winter, kept claiming some one had ripped off his cool breeze Poulan....then he finely dealt with the wood pile when he was hurtin for beer money and found it. Think it's in his scrap heap some where...must be hard to be a saw eh?

islandlogger

[shelbycharger400]

bout a year ago, at a local saw dealer..  i was kinda feelin down tellin them i needed a carb kit for a few saws...havin an oddball tillotson rev c  carb in hand (early stihl with a 12 in bar)
chattin away.. tellin him whats in my fleet, parents fleet ect..   getting carb kits for 1970's saws ect
i tell him my 2 saws are late 70's early 80's, a deere 50v and a craftsman 917, 65cc saw, he says... dont get rid of them, run them til they die, then fix them if you can, run the oil a bit heavy in the gas.    He goes on to say, he makes most of his money off parts sales, but also says the older saws are more robust and last longer , it dosnt matter if its homeowner or a commercial tree faller, than the newer plastic saws...

[fuzzybear]

fuzzy
So a stump saw doesn't have to run well?

  Oh they still run, but the second it drops to -25c the oilers break on those cheep plastic gears.  I run them until the chain stretches to the point I have to take a couple of links out. By then the saw has pretty much had it.  In the falling area I keep the stumps at 12" above moss level. But then the moss is 2' thick. Forestry wants it that way. But on the trail I cut them at ground level. It really puts a hurting on the chain and saw. But then I only paid $100 for a saw that does only one job and lasts for about 3 years. Takes a strain off of my "real" saw.
FB

[Cut4fun]

The 36cc 38cc 40cc  in the clam shell poulan I have had apart were pretty dang nice compared to crap in same homeowner stihl's rod 170 180 210.

See if I can find pics to compare.

Poulan top left side rod.




Stihl homeowner saws bottom

[shelbycharger400]

looks like a fine case of detonation on that stihl piston/rod!    One hammer blow..  possible straight gas ran in it.

it is definately sad that the pouland uses a H-beam rod ( think prostock v 8 motors use these, larger tho)
and stihl uses a straight forge? rod

all too common now ... a properly "cast" h beam rod will handle the stress vrs a forged thin rod.
surface area has to play in the equation

[tcrew]

well it is a vacuum cleaner with a chain.  Poulan is now made by electro lux, a vacuum cleaner company.
 I had my only saw go down a couple of years ago and was forced to buy a "wild thing" to finish out the orders I had. It ran good for a while then the oiler broke. I still use it for a stump saw.
 

Friends of mine build log homes and use cheap Poulan saws from Walmart.  When one breaks they throw it in the dumpster and buy another.  Worked for them for years 

   I have friends that do the same thing but with the Husqvarna 340. When the oiler breaks they toss it into a pile and buy a new one. The dealer wants $150 to replace the oiler, add $.54 a drive link for chain, and $90 for a new bar. Cheaper to buy a new disposable saw.
   Personally I buy quality saws and only buy a POS when I have no other option, then it becomes a slashing/stump saw until I kill it all together.
FB

@ fuzzybear,, that vacuum company elxctrolux is actually owned by,,,,, Husky! Go figure. My pops been selling those vacuums for 50 years. So i guess those cheap poulans are close cousins of the famous Huskys... Hmmmm.

[tcrew]

fuzzy
So a stump saw doesn't have to run well?

  Oh they still run, but the second it drops to -25c the oilers break on those cheep plastic gears.  I run them until the chain stretches to the point I have to take a couple of links out. By then the saw has pretty much had it.  In the falling area I keep the stumps at 12" above moss level. But then the moss is 2' thick. Forestry wants it that way. But on the trail I cut them at ground level. It really puts a hurting on the chain and saw. But then I only paid $100 for a saw that does only one job and lasts for about 3 years. Takes a strain off of my "real" saw.
FB

3 years of use from a $100 saw??? thats exactally what i got out of my new bought Stihl MS250! and it was not $100.. And i said it b4, that it seems any new saw i buy takes a crap on me way sooner than every used saw i ever bought. Just seems backwards. But true.

[tcrew]

I've really only had a one time experience with "Pulling on the Poulan" back in early 90's was helping a buddy log off his land, beutiful stand of big 2nd growth Dougs and Western Reds. I was mostly running my 044 and 066 but my buddy shows up one day with a Poulan he bought on sale at K-Mart or some such place, cant even remember what model it was and I must admit after I got done poking fun at him we tryed everything we could think of to see if we could kill that saw and be danged if it just kept on pulling chips! It was always harder then 'eck to start (pulling on the poulan!!) but once it fired off that little Green and Black machine was ready to go! We had a good time with it...my buddy got hurt shortly there after (massive brain trauma never was the same man) and had to sell everything to cover his medical bills, last I saw of that Poulan it was sold to a drunk cord wood cutter down the way...I think he finely managed to kill it after he forgot where he left his saws and dumped a truck load of wood on it and then let the pile of wood sit for the winter, kept claiming some one had ripped off his cool breeze Poulan....then he finely dealt with the wood pile when he was hurtin for beer money and found it. Think it's in his scrap heap some where...must be hard to be a saw eh?

islandlogger

     Maybe its just me,but after my "Premium" saw blew its life after very light use, u are convincing me 2 just forget about all the orange and go the color of $ poulan green! if i could get 3 years out of a $100 saw for what ive paid over $400 for,then why buy Orange? Ive owned a wild thing 15 years ago,and maybe its time to go back. And shut down these ARROGANT dealers that dont deserve my money! I like ur story. Thanks for sharing...   

[tcrew]

Well there you go .Firstly in the Yukon most likely everything is sky high .

Even in the middle of the big corn field in Ohio you're going to shell out 50-60 bucks an hour at a dealer plus have parts marked up about twice what they're worth .In some cases ,Stihl you have no choice  .

Often times repairs are quoted from a "flat rate book " which in most times figures things pretty heavy in favor of the dealer .The price is  astounding for the owner who often just buys a new saw in it's stead and the dealer gets the old one by not charging for the trouble shooting .

The oldie ends up in the dead pile then guys like me pick them up for pennys and get them running for next to nothing .The dealer sold it for cash so he's happy ,I'm happy and the former owner never hears a peep about it .Fact he could care less unless his new saw quits on him .

Yeah,, thats what my stihl dealer tried to pull on me,, offered me the $24 in labor  to diagnose my saws problem(bad bearing),,and i told him in a polite way, NO thx. Ill fix it my self. Freaking arrogant dealers! Charge us twice what they should then insult the customer 2 boot. Im learning allot from all u,and GREATLY appreciate ur wisdom. 

[SPIKER]

I own 2 poulans a 18 yr old wild thing (might be a 96 give or take a year paid 109 at wally world) and a wood shark 14" bought when our kmart went under cira 2001 for 54 bucks close out (they had 3 of them setting there should have bought em all for that price.)   

well the wild thing was bought for a single task figuring to kill it quick & hard by cutting OLD railroad ties for a tie wall I was putting in.   cut probably 40+  ties to length and at odd angles as I made half round island along a parking area I dug out 5+feet deep into a hillside 100ft or so long.   i managed to eat a chain or two and the factory bar.   throwing sparks and drop it into a bucket of water to take the red out of the blade on several cuts    cut maybe 20 cord of wood in the last 15 yrs or so with it ran through a few Oregon Bars and a dozen chains maybe.   thought someone stole it (left it behind a wood pile out in the woods and was there over a year faded the plastic pretty bad.)   found it when I hit it with a machete clearing 18months of weeds off the wood pile.    it was setting right where I left, ;(  dang thing was there choke still on and ignition switch still on still had gas.   started on 3rd pull old gas & all!!?!?!?!    I do use fuel stabilizer and poulan oil with added fuel stabilizer.   worst thing for me has been shrinking gas caps due to ethanol. in our gas

The 14" wood shark about the same punishment (brother and nephew have about killed it.)  it seems more powerful with the smaller bar.   Then I also have a Poulan Pro pole saw that wont run for c()*$& though I admit I have not tried to re-tune.   

I have re-tuned both above saws over the years slightly here & there.   My brother after seeing my wild thing fire up after setting out in the woods for a year bought one.   it has been all troubles  and is the 16" model but then they abuse there stuff by cutting dead rock elm probably 3 steps harder than a treated rail road tie with spikes still in them...


Mark

[AdkStihl]

Stihl homeowner saws bottom

(Image hidden from quote, click to view.)

This is from stuffing a rag or any other "piston stop" in the top of the cylinder to remove the clutch. If it were straight gassed, there would be score marks and material transfer on the piston eh !
The rings arent stuck either......

[Cut4fun]

Stihl homeowner saws bottom

(Image hidden from quote, click to view.)

This is from stuffing a rag or any other "piston stop" in the top of the cylinder to remove the clutch. If it were straight gassed, there would be score marks and material transfer on the piston eh !
The rings arent stuck either......

  duh no kidding, the pic came off the internet to show the cheap crap rod used in the plastic stihl series 170 180 210 compared to the rod in the 36cc 38cc 40cc poulan. 

[tcrew]

The 36cc 38cc 40cc  in the clam shell poulan I have had apart were pretty dang nice compared to crap in same homeowner stihl's rod 170 180 210.

See if I can find pics to compare.

Poulan top left side rod.

I know my 3 year old 250 Stihl rod is like the poulan, a i beam rod, not like the pic of the stihl solid rod .
(Image hidden from quote, click to view.)


Stihl homeowner saws bottom

(Image hidden from quote, click to view.)