China asws

[lumberjack48]

http://www.aliexpress.com/wholesale/wholesale-chainsaw.html?productId=434546160#list-items

This is what you have to watch out for when buying new or used.

[acco1840]

have heard good reports about their Chinese 070's......would like to get one to try it. I run a German 070, so I could use it for parts if it sucked....

[snowstorm]

look at the 381 stihl.. the chain is on backwards

[acco1840]

look at the 381 stihl.. the chain is on backwards

!!!

[beenthere]

 

That is funny!

[WDH]

So that is why they don't cut as well as the real deal  .

[isawlogs]

 Give those guys a break , the intructions to put da chain on was in English 

[trapper]

Many of the saws I see on display at menards have the chains on backwards.

[John Mc]

A friend of mine who use to run a nearby career center's Forestry and Natural Resources program told me about overhearing a conversation at Sears one day: A customer was returning a saw a few days after he had bought it. Said He brought it home, added fuel mix and bar oil, fired it up and it ran fine, but just would not cut worth a darn. It wouldn't do anything unless he really leaned on it. The Sears employee got was giving him a bit of a hard time on the return.

My friend sidled over to check out what was going on... took a look and said, "that might cut a bit better if you didn't have the chain on backwards." (The Sears guy then started giving him a hard time saying that the chain would only go on one way, so it was fine.)

[Spike60]

I have one of those chinese 365's here at the store. Customer got hosed and learned his lesson. Tank and chain brake handle were both busted in shipping. AliExpress told him to shove it, saying that once he signed for the package, the breakage was his problem. (As if you can open packages at the post office before signing for them???)

I made a deal with him that he'd give me the saw if I wrote a quick letter for his credit card company declaring the saw was a fake, and fraud had taken place, which is how I ended up with it. I put a used 372 tank on it so I could try it out.

Those saws are even worse in the flesh than in the pics. Every component is absolute junk. Much worse than many of the aftermarket parts that are sold here. The "immitation carb" needs constant adjustment to the point that the saw is unuseable except as a GTG novelty. With a real carb on it, it actually runs and making a few cuts, it doesn't seem that bad. But it hardly seems possible that it would stand up to much sustained use.

The real question with this crap becomes: Are you saving $300, or are you throwing $300 down the drain?

[Al_Smith]

I don't know whatever became of that certain poster from Oz who touted those Chinese take offs .

The old boy didn't get a warm welcome on other forums so maybe he gave up or something . Probabley just as well .I'd imagine the things were made of remelted beer cans and reclaimed rusty nails anyway .

[aquacanis]

 8)I just got my new Tanaka TCS33eb in the mail yesterday and I broke it in on some trimming while running it with a 40 to one mix until it is broken in.  It started on the 3rd pull with its first tank of fuel and runs well.  No primer bulb!  I love it. A real carburetor.  Did a little tree limbing around the house and it works fine.  It started with the first pull every time I shut it down for 5 minutes or so.  I shut it off and let it cool a little then restarted to test how bad a starter it was going to be.  Went out this a.m.  first pull fired, second pull started.  I am very pleased as I have found many of these small saws to be poor starters.  It is a toy compared to my bigger saws but it should be perfect for topping off felled trees and cutting the small stuff.  I think it is chinese made but not sure.  I am getting older (67) and it sure feels better than my 14 lb. bigger saws.   

[crd1957]

i see a lot of chinese junk in my shop. pumps generators pressure washers chippers ect. most are still under warranty.they are sold by local farm and ranch and box stores.they have no one to do warranty work on this junk so they bring them to me.most of the time part are not availible. so i get to tell the customer they own a boat anchor.then they are mad at me not the store not the store that sold it.

[Al_Smith]

FWIW locally most small engne shops will not work on Chinese knock offs .Truth be known more times than not they just can't get the parts .

This stuff is a buyer beware type situation .

[Ianab]

Tanaka isn't one of the Chinese knock-offs, it's a long established Japanese Co, now backed by Hitachi.

Not sure where their factory is now, but they do have a proper dealer network, spare parts, and a warranty that's actually worth something.

Not the same as the Chinese "fly by night" sellers.

Ian
 

[aquacanis]

I think somewhere between the last three posts lies the truth.  I was just on a site
that lists every part and the price for my new Tanaka  It has a secure ordering site with the Microsoft lock and lists every part for the saw I just bought.  Are you guys telling me that if I do my own work (which I do) that I could not buy these parts?  Shame.

[John Mc]

... my new Tanaka ...  Are you guys telling me that if I do my own work (which I do) that I could not buy these parts?  Shame.

I didn't see anyone saying you can't get Tanaka parts. In fact, just the opposite. As Ianab noted Tanaka has real dealers and parts network. It's the Chinese knock offs that you may have trouble getting parts for.

[Ianab]

Your Tanaka is a legit Japanese brand, not a dodgy Chinese knock-off.

Tanaka aren't well known for making chainsaws, but they are big in general gas powered tools like leaf blowers, post hole borers, water pumps etc, which have a very good name. So no reason to think they can't make a perfectly good chainsaw as well, and they have the dealer network supporting their whole range of equipment

Ian

[Al_Smith]

Chinese and Japanese are not one in the same .Japan has came a long ways since cheap transister radios of the late 50's .Fact a majority of Japanese stuff rates right up with the best as much as I hate to admit it. China is still in the stone age regarding quality .

[WDH]

How can the Chinese get away with making an exact copy right down to the brand name and number?  That should be illegal.