CMS introduces the NEW 14" PTO Shaving Machine for under $20,000!

[RalphV]

Carolina Machinery Sales is proud to announce the addition of the 14" Shaving Mill form Hutto Wood Products.  This mill is built for the small operations and landowners that need to produce shavings, and at a rate of 10 yards per hour it lives up to the task. 

Contact CMS for more information:
http://carolinamachinerysales.com/?page=detail&id=used&machine=002172
704-288-1904
ralph@carolinamachinerysales.com

•14" x 45" Box with 6-knife head
•Head is fully accessible when the box is pushed back for easy tooling changes
•10' x 12" Angled outfeed belt
•New knives are much cheaper than the competition!  
•PTO Drive requires a 50 HP tractor (Electric/Diesel/Gas optional)
•Self Contained hydraulic system - Hook up the PTO and start production!
•Hydraulic ram - NO CHAINS or CABLES
•Hydraulic box controls - Foward, reverse and neutral
•Hydraulic variable speed control
•60 Gallon Hydraulic tank
•Separate pumps for the outfeed belt and box
•Machine is plumbed for (1) extra hyraulic device like an additional outfeed conveyor


Options include:

•Electric, diesel & gas power
•Trailer package
•Outfeed conveyor  

[beenthere]

Looks like a good machine.

Missed seeing it being loaded. Hand carry blocks apparently.

Surprised at two safety PC issues "missed" but shown in the video.

One is the spinning PTO that isn't covered.
The other is leaving the tractor run while messing with the blades/cutter head.

[RalphV]

Thanks for the input.  We ran the video where we were testing the mill.  We lifted the logs by hand, but have had customers load 4-5 bolts on forks or bucket and roll them into the hopper.  The hopper can be controlled to stop at your point of choice for a small deck or powered load.

Also, the head cannot be engaged while the box is diconnected from the directional switch.  Good catch though!

Ralph