Question on Dolmar 7900 Oil Intake Line

[tbrickner]

Hi all,

I need to remove the Oil intake line from my Dolmar 7900.  It appears that the filter or line is clogged.  To get access to it I had to take the clutch off the unit.  I am not sure if the oil line screws into the housing from the clutch side into the oil reservoir or if it is just pushed in with an o-ring.  It is hard to tell from the assembly pictures if its threaded or just a compression o-ring.  Any help would be great on this.  Or let me know if I need to expound further.

Thanks,
Tom

[chainsawr]

It is a molded rubber line that just pushes on.  Careful not to rip it.

[tbrickner]

Thanks Chainsawr.

Thats what I needed to know.

Tom