Author Topic: Well, bought me a mill :) (Read 3346 times)

VictorH · « **on:** October 22, 2009, 09:12:52 pm »

Hello everyone,

I've been reading the posts on this site for months. I was going to build my own mill but realized I needed to spend the time doing something I actually know how to do.

. I make bent willow and log furniture and decor as a side business. I do contract work to pay the bills. Am having a good year and decided to just buy a mill. The mill will expand the side business. Looked into several and really thought about buying a new manual mill. But over and over the advice on here is get as much as you can afford with as many labor saving features you can. I decided to look at for a used one. I found a 1995 LT40H24 with 1290 hrs - with an in-feed log deck, Lap-siding maker, sharpner and setter. At $9000.00 I think it is a good deal. I leave Monday to retrieve it from just North of Green-bay. I will post pics if I find a camera - ours was stolen this summer

I have two questions that have been asked before I'm sure, but have not found the threads yet. I can add a debarker for $1800 - 1900. I realize that there are a bunch of variables with log condition, however just how much longer does a blade last using a debarker versus not? In other words how fast will this pay for itself?

The second is about the long discussed which blade is best. I have read the recent thread on the 7* blades and they seem to have those who really like them. Woodmizer site suggests the 10* as a general purpose use on most everything blade. So what do you all think?

By the way I bought the mill many weeks ago but could not get away until now to get it. In the mean time I bought an older boom truck with winch to snag a log here and there with. And have been clearing out junk from the shop yard to make room

. I have about 10 logs salvaged from the local brush dump. I know -metal!! But need to practice on something. Have 3 maples, 1 huge Linden, 3 elms, 2 Pines and one unknown - maybe ash.

I should also add that my dad has a degree in forestry and worked for Midwest Walnut when I was a boy. He is retired from the Navy now and seems as excited as I about the mill.

MotorSeven · « **Reply #1 on:** October 22, 2009, 09:22:47 pm »

9K? nice find! One went here at an auction for 14K, no sharpner/setter. I'd say you did very well. I can't answer your question about the blades...I'm still using the ones that came with my vintage 2001 LT15.

RD

fishpharmer · « **Reply #2 on:** October 22, 2009, 09:30:06 pm »

Congrats on the mill. Welcome to the forum. We look forward
to hearing about your adventure.

southpaw · « **Reply #3 on:** October 22, 2009, 09:32:36 pm »

Welcome and congrats on the mill,

.

pineywoods · « **Reply #4 on:** October 22, 2009, 09:35:42 pm »

Welcome Vic. You done good on the mill. that's a low time machine. My 1995 has over 7000 hrs, still going strong. One right down the road that has 17000 hrs, still in daily use. Take care of it and you can't wear it out. Blades - won't make much difference until you get some experience under your belt. There's definitely a learning curve when it come to sharpening and setting.

nas · « **Reply #5 on:** October 22, 2009, 09:38:33 pm »

congrats on the mill and welcome to the forum Victor

I can tell you that the debarker on my mill is definitely worthwhile. I cut a lot of white cedar and the bark seems to kill blades. Can't help you on the 7° blades, I use 10° and they work fine. I might try some 7° when I need to buy some more.

Nick

backwoods sawyer · « **Reply #6 on:** October 22, 2009, 11:05:10 pm »

I find the debarker has limitations in its use. On some logs it will tend to climb on the opening cut when it would be most needed leaving me to cut straight thru all the grit and grime anyway.
Having the sharpener and tooth setter will allow you to keep those saws sharp. Myself I would not spend the money on one. Others on here will swear by them.

Chuck White · « **Reply #7 on:** October 23, 2009, 04:41:53 am »

I feel that the debarker will extend blade life between sharpenings by at least 4 times.
A lot of the logs I saw have lots of mud in them from skidding and without the debarker the blade would be dull by the end of the first cut!
I for one would recommend the debarker as your first option purchased.
My mill is just like yours and I have 1,150 hours on the meter!

As for blades I recommend the .045x1¼-10°. This is the blade I use exclusively. I do mostly White Pine and Hemlock with a little hardwood thrown in, here and there!

Good luck with your mill!

moonhill · « **Reply #8 on:** October 23, 2009, 05:36:52 am »

If you are cutting clean logs which you have taken care of and not rolled them in the grit then you can get away without a debarker. All it takes is one self loader full of gritty logs to make it worth the investment. It is not a miracle cure but it goes a long ways to keeping you sane.

I tried sawing some river salvaged logs once, they were yarded onto a sandy beach right out of the river, green slim and grit attract, then trucked to a field a few miles away. They sat there till December, the grit was frozen on. I was the second to try them, it didn't go well. I did not have a debarker at the time.

Try the different bands and report back with your results.

Tim

bandmiller2 · « **Reply #9 on:** October 23, 2009, 06:20:37 am »

Welcome Vic,a debarker is sure nice to have but if your not in a big hurry you can clean a path and /or debark the dirty ones.You yourself will have to try different bands and pick what you like best ,they will all cut.Many co.'s will send you a sample to try,myself I like Timberwolf.Frank C.

Burlkraft · « **Reply #10 on:** October 23, 2009, 06:45:47 am »

Victor......If yer gonna be in Green Bay yer gonna be drivin' right by me and Beenthere

If ya come through on a Friday we could buy ya lunch at The Rox and then give that nill a good inspection fer ya

MotorSeven · « **Reply #11 on:** October 23, 2009, 09:23:46 am »

My debarker is a water hose.....don't know what I'm going to do when the dang thing freezes this winter.

RD

VictorH · « **Reply #12 on:** October 23, 2009, 09:36:58 am »

Thanks everyone. I've gleaned a lot from the forum.

Chuck - 4 times would sure pay for itself in a hurry. thanks for the info.

Burlkraft I will be thru Greenbay on Tuesday and heading out with the mill that evening.

Thanks again
Victor

Dave Shepard · « **Reply #13 on:** October 24, 2009, 04:21:09 pm »

I believe the 7 degree bands are intended for the higher horsepower mills. I really like our debarker on the Super Hydraulic. Definitely makes a difference. I think you'll find the 10 degree bands will work well on that mill, with 4 degrees for frozen or hard woods, like black locust or white oak. I started on a mill just like yours, minus the hydraulics.

Brucer · « **Reply #14 on:** October 27, 2009, 12:16:00 am »

My first mill didn't have a debarker. When I was sawing my own logs (smooth bark, pick 'em up, don't skid 'em) that wasn't a problem. When I was sawing a customer's logs that had the bark falling off, no problem. When I had a hose handy to clean dirty logs, no problem (but it slowed me down). But when I was cutting Douglas-Fir (deeply furrowed bark, skidded out of the bush), that was a problem.

My second mill had a debarker and I would never buy another mill without one. It's a time saver, not just a blade saver.

Quote from: backwoods sawyer on October 22, 2009, 11:05:10 pm

I find the debarker has limitations in its use. On some logs it will tend to climb on the opening cut when it would be most needed leaving me to cut straight thru all the grit and grime anyway.

Now that's interesting. Never had that happen. I wonder if it's a species issue

.

I use 10 degree blades for just about everything. I did have one occasion where I was sawing very wide, very dry wood and I could not avoid a wavy cut nohow. Tried every trick in the book, every trick I could find on the forum, and every suggestion by the WM rep. Then I tried the 7 degree blades and they worked like a charm. I ran the first blade until it was so dull it was pulling wooden whiskers out of the cut, and it still ran true. That's with a 28 HP gas engine.

The 7's work OK on softwood, but definitely not as fast cutting.

I use WM blades exclusively, but I think what's most important is to stick with one brand of blade. Try another brand after you've had some experience, if you like, but don't go hopping from one to another to another.

petefrombearswamp · « **Reply #15 on:** October 27, 2009, 05:54:02 pm »

The debarker is the way to go with dirty stuff.
One problem however i had with the W Pine I just cut, which was cut last spring (Some blue stain) I found that the de- barker put a lot of stuff into the in feed blade roller jamming it if I wasn't diligent causing grooves in the flange.
I learned the hard way that a new roller was about 70 bucks with shipping. those wm guys wouldn't sell only the shell but the entire assembly.

Brucer · « **Reply #16 on:** October 27, 2009, 11:59:38 pm »

Gotta keep that flexible guard on the debarker adjusted right.

Chuck White · « **Reply #17 on:** October 28, 2009, 08:32:21 am »

Quote from: VictorH on October 23, 2009, 09:36:58 am

Thanks everyone. I've gleaned a lot from the forum.

Chuck - 4 times would sure pay for itself in a hurry. thanks for the info.

Burlkraft I will be thru Greenbay on Tuesday and heading out with the mill that evening.
Thanks again
Victor

I pulled the mill into a sawsite one time and had to take a closer look at the logs.
I was told the logs were w/pine and hemlock, but from about 20 feet, they looked like beech, they were so dirty with dirt and clay!
I told the customer that if it weren't for the debarker, I couldn't even justify sawing them.
Therefore, you see, that debarker will pay for itself in short order! There was over 8,000 bf in that one pile of logs!

VictorH · « **Reply #18 on:** October 30, 2009, 11:13:32 pm »

Here is my mill

And this is me. Getting ready to cut my first log.
A large maple salvaged from the tree dump. Nearly 8 feet long and about 32" in diameter.

/100_0667.JPG[/img]

I was real happy with how it went. To be honest I had never seen a woodmizer in action. I read my manual and tried to remember all that Mark had told me when I picked it up. The cuts were a little wavy untill I remembered to re-adjust the tension

After that nice and flat. Ended up with 9-1x12's, 11-1x16, 5-2x6, and a 1x6. I began at dusk and did most of it at night under lights cobbled together so I could keep going. Hit no metal but did find a nest of ants. Don't know if I will make any money at this but I will have a lot of fun.

Tom · « **Reply #19 on:** October 30, 2009, 11:19:14 pm »

That wouldn't be a grin on your face, would it?

Yessir, you have it bad. Didn't you notice that the sun went down? Yep, your gonna fit in OK here.

It's getting dark!

VictorH · « **Reply #20 on:** October 30, 2009, 11:38:05 pm »

Oh you mean this grin

fishpharmer · « **Reply #21 on:** October 31, 2009, 02:26:30 am »

Victor, nice looking mill. Them trees in Nebraska better be skeered

nas · « **Reply #22 on:** October 31, 2009, 07:06:45 am »

Nice mill. Looks great for a '95

Have fun

Nick

WDH · « **Reply #23 on:** October 31, 2009, 07:27:26 am »

It is a nice looking mill. Cutting in the dark, huh

. That was also a fine first log

.

For someone who never saw one run, you didn't do bad at all

.

Don K · « **Reply #24 on:** October 31, 2009, 07:39:35 am »

Congrats on the mill and welcome to the world of sawdust addiction.

Don

sawman · « **Reply #25 on:** October 31, 2009, 09:08:36 am »

congrats

Magicman · « **Reply #26 on:** October 31, 2009, 09:17:01 am »

I've been gone for a couple of weeks, but it looks like 1st: Welcome, and 2nd: Congratulations. You came to the right place for answers and opinions, and looks like you did quite well with your mill purchase.

Debarker, Yes. I bought my mill used and thankfully it had one. Dirty or clean, I use it anytime I'm cutting through bark. For resharpening blades, I use WM ReSharp. Works for me......

WDH · « **Reply #27 on:** October 31, 2009, 09:27:34 pm »

The WM ReSharp program is outstanding.

customsawyer · « **Reply #28 on:** November 05, 2009, 04:35:34 am »

Welcome to the forum and congrats on the new to you mill.

VictorH · « **Reply #29 on:** November 06, 2009, 12:55:56 am »

Thanks everyone. Am really enjoying the mill. Cut up a large Ash today. Used the drip lube. That sure helps keep the blade clean. I have the standard sharpener and was wondering can I use one of the CBN preshaped grinding wheels on it?

VictorH · « **Reply #30 on:** November 07, 2009, 12:02:19 am »

Spoke to woodmizer and can not use the new CBN wheels. Found my first metal today buried in the Ash log I started the other day.

Had to happen. At least it was in the log and not orange outside the log.

Magicman · « **Reply #31 on:** November 07, 2009, 04:04:41 pm »

Quote from: VictorH on November 07, 2009, 12:02:19 am

Found my first metal today buried in the Ash log I started the other day.

At least now you don't have to worry about if you are going to hit metal......it's when....

paul case · « **Reply #32 on:** November 07, 2009, 06:54:31 pm »

hey vic, welcome
if you cut for yourself dark may work ok but most of my customers want me to cut when i can read the scale.

my mill is all manual except for the motor turning the blade and my debarker looks like my 15 year old and a two bit axe!!! not very high speed but effective. new mill looks great and sounds like a good deal. congrats! blades i use timberwolf. cooks super sharp are cheaper but i have never thought that i didnt get my moneys worthwith either try some and see what you like. be sure to talk to the blade maker about shipping costs. some wont charge shipping on ten or more . something to think about pc

Magicman · « **Reply #33 on:** November 07, 2009, 10:29:54 pm »

Quote from: paul case on November 07, 2009, 06:54:31 pm

if you cut for yourself dark may work ok

If you cut in the dark, the shower of sparks when you hit the log clamp will wake you up......Don't ask how I know....

paul case · « **Reply #34 on:** November 08, 2009, 09:50:00 am »

magicman , are you making magic wih those sparks? maybe you need to run metal cutting blades? i bet when it happened the light came on huh? experience is the best teacher. pc

Magicman · « **Reply #35 on:** November 08, 2009, 02:44:29 pm »

Quote from: paul case on November 08, 2009, 09:50:00 am

magicman , are you making magic wih those sparks? maybe you need to run metal cutting blades? i bet when it happened the light came on huh? experience is the best teacher. pc

Yup, just part of the learning curve. Daytime is for sawing.....Nighttime is for sleeping......

News:

Author Topic: Well, bought me a mill :) (Read 3346 times)