Author Topic: String trimmers (Read 1653 times)

Night Raider · « **on:** June 06, 2009, 08:21:42 am »

I'm looking for a string trimmer just for use around the house, does anyone have experience with Stihl's line. It won't get used a ton but I want it to work when I want it to, I'm happy with my ms361 but I don't need a pro string trimmer just one that cuts grass around fences, the FS38 is $149 but maybe it's worth spending a bit more?
Anyone have experience with these?

Thanks

tyb525 · « **Reply #1 on:** June 06, 2009, 01:01:23 pm »

I just get the square string from the local hardware, it's translucent orange, and seems to last. We have an older, bigger stihl, not sure what model. It is good for thick brush. Otherwise, we use a smaller mcculloh, which works well in grass and light weeds, despite the fact that it is less powerful. We use the thickest string we can fit in it.

D._Frederick · « **Reply #2 on:** June 06, 2009, 01:27:03 pm »

Check the Shindiawa line of power equipment, there string trimmers have a lot of ZIP and are trouble free.

John Bartley · « **Reply #3 on:** June 06, 2009, 02:50:51 pm »

Quote from: Night Raider on June 06, 2009, 08:21:42 am

I'm looking for a string trimmer just for use around the house, does anyone have experience with Stihl's line. It won't get used a ton but I want it to work when I want it to, I'm happy with my ms361 but I don't need a pro string trimmer just one that cuts grass around fences, the FS38 is $149 but maybe it's worth spending a bit more?
Anyone have experience with these?

Thanks

The more versatile and more vibration-free trimmer will be the straight shaft trimmer. The straight shaft gets under bushes and decks more easily, is easier on the back and will take some of the lighter duty blades. It's been a few years since I sold my small engine shop (I was a Stihl dealer for many years), but the bottom end model that I remember was the FS55. It was an excellent little unit and almost trouble free.

cheers

John

wi woodcutter · « **Reply #4 on:** June 06, 2009, 03:57:18 pm »

I have a FS55 it is a great little trimmer. Like my other Stihl equipment I never have any problems with it. I think I paid $199.99 for it.

SwampDonkey · « **Reply #5 on:** June 06, 2009, 04:46:10 pm »

I have a MTD Yard Man 490 and it has worked fine. I paid $99 at Walmart. However, today I ruined the housing for the spool. The spool nut was stuck on there hard and I tried to turn it off with vise grips. Wrong idea I stripped the plastic housing that is molded for a nut on the shaft. I should have used the impact wrench, which I did later and it came right off with a quick touch of the trigger. Anyway I see the part for $14 in SC, I also looked at getting a new spool and nut, that all totaled up to $33, then UPS for $22 I think. So I gotta get it in town at the service centre, I bet it ain't no $55 bucks. I've used that hexagon cross-sectioned string and it don't last as good as the round stuff, chews the hex up like spagetti. The round lasts a long time in mine.

LeeB · « **Reply #6 on:** June 06, 2009, 05:07:59 pm »

I bought a little homelite last year at the despot for around $100. It worked good until my future SIL got ahold of it and decided he could "fix it so it worked better". Lindy bought a new cub cadet just the other day for around $150 from TSC. We'll see how long it lasts. She says it works good. I haven't seen it yet.

beenthere · « **Reply #7 on:** June 06, 2009, 08:53:01 pm »

Was that $150 cub cadet off the toy shelf?

Jasperfield · « **Reply #8 on:** June 06, 2009, 09:11:59 pm »

I have a FS55 and a 88. Both Stihl. They cut really well and without much vibration. You can also use metal brush blades with them.

If I had to replace either I'd replace with the same model.

LeeB · « **Reply #9 on:** June 06, 2009, 11:44:10 pm »

I dunno what shelf she got it off of. I wernt there.

beenthere · « **Reply #10 on:** June 07, 2009, 12:01:52 am »

Sorry LeeB
I was on a different track (happens !!), and was thinking cub cadet lawn tractor, not string trimmer. Was thinking you misplaced a zero, thus my comment. Out a line..and didn't know cub cadet had their name on string trimmers. Ya learn somethin every day here.

LeeB · « **Reply #11 on:** June 07, 2009, 12:25:16 am »

I dunno about that either. There's no telling what she bought. I find out Friday whaen I get pardoned, er when I finish my hitch at work.

CLL · « **Reply #12 on:** June 07, 2009, 12:44:23 am »

All we ever used on the horse farm I managed was Stihl, their almost bullet proof. Our biggest one was like a back pack and it used huge string and would eat you up if you got into some gravel. Most where smaller, like for home use and they lasted two-three years doing 5 miles of board fence.

ScottAR · « **Reply #13 on:** June 07, 2009, 01:16:17 am »

We've got an FS44 stihl.... I think the Fs55 replaced it...
It's been a trooper. Straight shaft is the only way to fly if your
over about 4ft 10in tall. Much more natural.

The old 44 is getting a little weaker than it used to be and has
a few minor problems. I'm looking to replace it and watch
this thread as well.

Not to hijack.... Anyone have opinions on the Kombi-system?
I'd like a chainsaw on a stick as well.

tonto · « **Reply #14 on:** June 07, 2009, 10:52:10 am »

My wife bought me the Kombi KM110 with the pole saw and string trimmer attachments for my birthday. Absolutely love it, look forward to adding attachments to it. New engine has plenty of power. A little pricey but excellent quality. Tonto.

wi woodcutter · « **Reply #15 on:** June 07, 2009, 03:35:19 pm »

Quote from: tonto on June 07, 2009, 10:52:10 am

My wife bought me the Kombi KM110 with the pole saw and string trimmer attachments for my birthday. Absolutely love it, look forward to adding attachments to it. New engine has plenty of power. A little pricey but excellent quality. Tonto.

That is good to know, I think next weekend I am going to pickup a Kombi KM110. I want the string trimmer, pole saw and the tiller attachments. I'll let you all know how I like it.

John Bartley · « **Reply #16 on:** June 07, 2009, 03:51:43 pm »

I have the FS110. I bought the first one into my dealership when they came out and I LOVE it!! As soon as they came out with the Kombi system, I swapped the full length drive tube for the half length tube and then bought the saw blade head kit, chainsaw, rototiller, and dethacher (the dethatcher is for the MM55, but I was able to make it work...

). It's a great set-up.

cheers

John

ksu_chainsaw · « **Reply #17 on:** June 08, 2009, 08:46:23 am »

I like the Stihl chainsaws but their trimmers leave a little to be desired IMHO. I prefer the RedMAX line and the prices are slightly lowere than the Stihls for the same size engine. Just make sure whatever trimmer you get has the straight shaft and a loop on it for a harness- your arms and back will thank you at the end of the day.

The first time I pulled the RedMAX out of the barn this spring, all I had to do was dump out the old gas, blow out the air filter, refill it with fresh mix, and give it 2 pulls, and it started right up.

Charles

SwampDonkey · « **Reply #18 on:** June 08, 2009, 04:36:31 pm »

Checked the parts centre here in town. The parts I listed cost about $35, will be in in a week.

Mine's a curved shaft, has no clutch, works fine.

Raider Bill · « **Reply #19 on:** June 09, 2009, 09:57:43 am »

I have a echo pro model which I'm not very happy with. Several case leaks that I have to constantly tighten, plus the string holder has had to be replaced 3 times. Poor design in my opinion.

News:

Author Topic: String trimmers (Read 1653 times)