Big log (with pictures!)

[VT_Forestry]

Someone (not me, I found these on a Jeep forum I belong to) had a plan for a big log when they got it home...it was just the getting it home that proved to be the problem





hey, got it sittin on the trailer!




something looks...strained


take it off...

[Dodgy Loner]

Wow, I guess they severely underestimated the weight of that log   If they had put it a little closer to the trailer axle, maybe they wouldn't have ruined the truck in the process of determining that the log was too heavy to haul

[Jeff]

Guys look around, this has been posted several times on the forum.

[Dodgy Loner]

Really?  Guess it'll shortly be time to post that moose logging photo again, too.

[Jeff]

   Thats what this one has turned into. The v-8 chainsaw one too.

[VT_Forestry]

haha  my fault for not looking   i saw the pictures last night and was so amazed that I didn't even think about looking to see if it was posted first...don't really know what I'd search for to find it either? A few keywords come to mind but I don't think they're appropriate    Feel free to remove...

[Jeff]

In the one photo, the kid with the hardhat walking in front of the trailer, you can see he was the fork truck driver as you can just make out his hat and vest in the shot where he is loading the log. I can see he is young, and most certainly very new and inexperienced. I'm not even talking about the way he loaded the log. Look at the way he parked the fork truck in the photo where he is surveying the carnage.  You never leave your forks parked with the ends in the air like that. Good way to get someone seriously hurt. He got out in a hurry not knowing what to do next. 

[LeeB]

You're quite right about those forks. I've beeen nursing my back for 30 years from that.

[Jeff]

I ran into one about half way to my knee years ago, left up by a greenie operator. I had jeans on and it still took the meat off to the bone. Man, that hurts for a bit.   If you left forks like that when the safety man was around, it was more then a warning the company got. There was zero tolerance for tipped up forks.

[Ed]

I've NEVER seen a truck frame flex the way that one did. Look at the gap between the cab & bed. 

That ain't a good thing.

Ed

[LeeB]

It really hurts when the forks are moving and you ain't.

[Jeff]

I've NEVER seen a truck frame flex the way that one did. Look at the gap between the cab & bed. 

I'd be willing to bet its because he dropped the log. Setting it down gently with an experienced operator would have shown it was not going to work. I've seen loading accidents over the years and I can almost play that one there out like a video in my head.

We had an old fart named Bill that worked at the mill that you could not tell a thing to. He was like a bull in a china shop on everything he did. I could tell many stories about the stunts he pulled, one almost killing me, but, thats a different story. He also was a friend of the boss, so he was allowed to be a dillweed.  One of his stunts was Telling another of his friends that he could load a 10 foot bundle of hardwood slabs in the guys pickup with the fork truck.  We NEVER loaded slabs in a pickup, but old Bill was going to impress his buddy and save him some work.

Needless to say, the bundle of slabs, slid off the forks, rolled, hit the inside of the truck box, and sprung it out at least 6 inches. Permanently.

[olyman]

I've NEVER seen a truck frame flex the way that one did. Look at the gap between the cab & bed. 

I'd be willing to bet its because he dropped the log. Setting it down gently with an experienced operator would have shown it was not going to work. I've seen loading accidents over the years and I can almost play that one there out like a video in my head.

We had an old fart named Bill that worked at the mill that you could not tell a thing to. He was like a bull in a china shop on everything he did. I could tell many stories about the stunts he pulled, one almost killing me, but, thats a different story. He also was a friend of the boss, so he was allowed to be a dillweed.  One of his stunts was Telling another of his friends that he could load a 10 foot bundle of hardwood slabs in the guys pickup with the fork truck.  We NEVER loaded slabs in a pickup, but old Bill was going to impress his buddy and save him some work.

Needless to say, the bundle of slabs, slid off the forks, rolled, hit the inside of the truck box, and sprung it out at least 6 inches. Permanently.

  dont ya just love working around idiots like that?? we had a few were i worked also. i tended to avoid them like the plague!!!!

[Ironwood]

If you guys have never seen your frame flex like that, then your just not working them hard enough.

           Ironwood


         

[rebocardo]

> Look at the gap between the cab & bed

I saw someone lift a Chevy pickup truck with a heavy and fancy all steel utility body (probably loaded with plumbing supplies) on the back ... they had all four lift arms forward of the bed ... bent the thing so it looked like a cat arching it's back.   

Don't know how it got up there like that, but, guy wanted to lower the lift without supporting the rear 

[SwampDonkey]

Seen a flex job on a brand new pickup to. Only weight was not involved, just a steep mound of dirt in the mouth of the road to a field to keep idiots out from rutting up the field. Well, one idiot thought he'd prove it. Went over the mound and on the way down the other side the bumper hangs on the mound and crimps the bed into the cab. 

[Tree tech]

Thanks for posting that ! Im new to the site and otherwise would not have seen it! Thanks tt

[Bowtie]

Thanks for posting that ! Im new to the site and otherwise would not have seen it! Thanks tt

Right on!! I have a Silverado just like that. I would be sick if that was my truck. About the forks tipped up, if that happened where I worked and the manager or safety director saw it, its immediate termination. We had a lawsuit a couple years ago and the company paid out over 45,000$ in damages.

[zopi]

See..if he'd a been on here he coulda used the log weight calculator and avoided the mess...<G>

There is a guy over on another forum who has a chainsaw mill that could probably handle most of that.

[WILDSAWMILL]

I USED TO PAINT NEW TOW TRUCK EQU ( OPS) in 1990-1994 we had new chevs bend from the weight of the tow bed just being set on easy the chev co soon provided a frame kit to install before the tow beds . the fords never needed it they were strong enough as is these were one ton trucks both claimed to be rated for the application
if you gave me a chev i would sell it imedality to buy a real tough truck a ford or dodge