This is way off topic but.....

[Bill Johnson]

In our little piece of heaven we are just wrapping up a volunteer project building rink boards for a 40'x100' outdoor rink.
The panels and supports are all done, the other night one of the fellows managed to get a boom truck with an auger so we put up 6 35' poles to mount lights on.
Now we decided we want to build a rink shack, the problem is we (I) need a set of plans for a building approximately 12'x16' complete with a material list so we can try and solicit support and supplies. The local sawmill gave an excellent deal on materials for the boards and if we can give a material list and plans may do the same for the shack.
Does any one have a set of plans or specs they can e-mail.
No the ice isn't in yet though it might be possible shortly.
Any help would be appreciated.

Bill

[Kevin]

Bill,
Your lumber store should have the plans,if not  they can be puchased for about $15 US., probably close to $20 CDN.
Our lumber stores here have them in stock.

[Jeff]

I found some good free plans I think, put to big!

http://www.public.iastate.edu/~mwps_dis/mwps_web/ut_plans.html#Anchor72044

[Bill Johnson]

Thanks guys
I'll find out tomorrow if we are going to build the rink shack.
We are putting the boards up tomorrow morning and hope to have it done before the rep from Molson's gets there to see how well we did, theres also a bbq planned for the volunteers and everyone else in town.
Hot time in Dobie tomorrow
Bill