Author Topic: Guess who won a free sawmill! (Read 4446 times)

Wife · « **on:** July 02, 2006, 09:53:27 pm »

So begins the story of one very lucky person who won a Skillmill at the Mystery Creek Fieldays in June this year.

To give the story full credit, I will begin on day one.

Here the Peterson crew have lined up their very first batch of Skillmills, which they plan to use for the Skillmill competition.

Here's a closer look at this new machine - still wet with thawed frost....Misty Creek it should be...

Well Jake starts the front one up, and the crowd gathers. The sign that says "from $3900" seems to confuse people a bit. "I thought sawmills started at $11000??".

Entry to the public was free - all one had to do was saw a single board, and they were entered into the draw. Here's Claire Watene stepping forward to give it a go. Darnz (in red) is training her.

Jake proudly sawing away...until we give him a hint and start sending entrants his way too....

...better post this before I lose it...more coming...

DanG · « **Reply #1 on:** July 02, 2006, 09:57:17 pm »

OK, OK, we're ready for the next installment. Who was it? Was it me?

Part_Timer · « **Reply #2 on:** July 02, 2006, 10:03:44 pm »

Well I wasn't at mystery creek so I bet it wasn't me.

Wife · « **Reply #3 on:** July 02, 2006, 10:07:06 pm »

Sue Billings gives the Skillmill a go....and another member of the public carefully inspects his sawn board.

Thelma (72) and Barry Vowles (74), even give it a blast. Thelma is very proud of herself indeed!

Over the next 3 days, over 776 people saw a board on the Skillmill. The queues to saw a board, get longer and longer. At times all three units are going, just to keep up! We have to load more logs every evening.

But we knock off early on the third day - we've are eager to find out if the Skillmill has won anything in the Equipment Awards. Here's the Peterson crew enjoying a drink, and waiting for news at the awards ceremony.

Fingers crossed!!

Wife · « **Reply #4 on:** July 02, 2006, 10:08:17 pm »

Gimme' a break - I need a toilet and coffee break before the next marathon post!!

Wife · « **Reply #5 on:** July 02, 2006, 10:28:53 pm »

Oh my gosh - Jake did it again! A brand new award to add to the stack...actually, there is now more timber in the Skillmill pile, than the big mill piles.

Jake doing the right thing and replying to our cat-calls of "speech, speech!"

But back to the point - sawing. Here Jake sets up a square cant between his new EZ-Dogs, to saw a fancy star shape.

The public are very curious. At the end of the day, Jake has a stack of weatherboards leaning on the front fence, plus a bunch of other fancy shapes too. I'll just have to build a playhouse at some stage...

OK, back to the point. Who won the Skillmill??? Right, go back to the earlier posts - see if you can spot the lady in red and grey jacket in two different pictures....

Sprucegum · « **Reply #6 on:** July 02, 2006, 10:38:38 pm »

I see her! I see her! Do I get a mill too?

Fantastic display - go they come with a gas motor as well?

Wife · « **Reply #7 on:** July 02, 2006, 10:39:01 pm »

We grab Gary from the Waikato Times tent, to come do the draw.

And the winner IS......

Sue Billing from New Plymouth!

Next post marathon, we find out more about Sue. How many women do you know of, that go to a major trade show with an unlimited budget, and what will Sue do with a Skillmill?? I heard mention of an oil-rig somewhere in there....

Wife · « **Reply #8 on:** July 02, 2006, 11:02:17 pm »

Oh, and I just wanted to say that you guys can get a chance to win the very first Skillmill to the USA later this year, if you happen across one of the stops on our roadshow...details to be posted.

NZJake · « **Reply #9 on:** July 03, 2006, 12:53:46 am »

Sprucegum, a 5KVA generator was running 2 of them at the show.

Electric will let you toy around in your shed without annoying the neighbour. Not to mention the fuel savings?

A 4KVA generator should have no problems running it (maybe even a 3.5, depending on its start up capacity)

North Wind · « **Reply #10 on:** July 03, 2006, 06:06:30 am »

where and when can we get some info on this

??

sawguy21 · « **Reply #11 on:** July 03, 2006, 11:46:57 am »

I sure enjoyed the pictures although it does not look much like the winter I am used to.

You really stirred up interest in the mill, it is an intriguing unit.

DanG · « **Reply #12 on:** July 03, 2006, 11:59:51 am »

Kerris, are you and/or Jake coming up for the U.S. roadshow this year? I'd sure like to meet either or both of you. I hope the roadshow includes the Moultrie, Ga. show in October.

joelmar10 · « **Reply #13 on:** July 03, 2006, 01:52:07 pm »

Here's the link: Skillmill

Radar67 · « **Reply #14 on:** July 03, 2006, 03:23:55 pm »

Nice page, but how much?

Stew

Part_Timer · « **Reply #15 on:** July 03, 2006, 05:38:51 pm »

Joel That's pretty good I work for them and didn't have that link. I'm gona call the boss (wife) and complain

Radar Third picture first post $3900 is what it says. I hope that 's right, for that price I know what to ask for for Christmas.

Wife · « **Reply #16 on:** July 03, 2006, 11:07:53 pm »

Joelmar you jumped the gun for me there...still adding stuff to that website (the American version)...and our RCs certainly deserved first info...but the good thing is you lit a fire under all of us in the office - you should see the scrambling to get correct info on that website now!! Give us a few days to get some video footage up there too.

The official US release will be on our Sep/Oct roadshow. Prices to be confirmed then, but I'm pretty sure it will be around the $3900 USD + state sales taxes if any. Thats from your nearest stocking point. We plan to have lots of dealers for these, so you can get them just about anywhere. Spec page will be on the website when I post it.

And I thought we'd get a breather from the New Zealand rush, before the American one. Hah! From the firepan into the fire. Gimme all ya got.

Wife · « **Reply #17 on:** July 03, 2006, 11:10:59 pm »

Oh yeah, DanG there will definitely be one of us over there. I hate flying, so might be Jake....will see.

joelmar10 · « **Reply #18 on:** July 04, 2006, 02:20:11 am »

Sorry!!!

Joel

Wife · « **Reply #19 on:** July 05, 2006, 10:27:03 pm »

Hey just to let you all know there are some video clips on the Skillmill website now...for a sneak preview.

This machine will be the ultimated for all those tiny logs you guys call "normal", and we call a pain in the a____.

Official release date in the USA will be end of September. I'll keep you posted on shows.

www.skillmill.com

News:

Author Topic: Guess who won a free sawmill! (Read 4446 times)