Author Topic: Wood burning truck! (Read 80387 times)

Paul_H · « **Reply #380 on:** March 20, 2009, 03:37:21 pm »

There is so much woodgas knowledge out there for free if you look.Of course lot's of the experts that share their info will guard some secrets but the good guys share more than enough to get a gasifier built.

I've posted links all through this thread to some pretty decent guys and here is another person generous with sharing knowledge,Jim Mason from Bereley California.I think I mentioned him to JPGreen awhile back but Jim's been busy so it's time for a update

Here is a truck him and his friends built a couple years ago a little before I finished mine.

and a link to more of the original projects they had done.There are a lot of pics and links if you look through the site.
Woodgas Truck

They've got a place in an industrial park that is built from shipping containers and he's been fortunate to have a good crew around him and they've come up with a lot of interesting changes and concepts like the Escape from Bereley Challenge last Fall.

No fossil fuels were permitted and they had to scavenge or barter their fuel along the way in the 3 day trip from Bereley Ca to Las Vegas NV.

Wayne Keith from Alabama,who was the man that Ellmoe had originally started this thread about,found a sponsor and entered his truck.Wayne drove from Alabama to the east coast,then drove cross country toward Berkeley,entered the race,came in 2nd place and then drove back to Alabama all on wood fuel,only.
The guy that won the race is a writer for Mother Earth News.He had a veggie oil car and he simply bartered t shirts for veggie oil outside of grocery stores.Like a kid outside the liquor store waiting for a boot.Wayne had to scrounge and process wood scraps along the way and was a fairly close 2nd just the same

This was Wayne's first truck.

Jim organised the event and it will be happening again in a few months.

Here is a link to the race last year with some more pics

The Great Race

Lately they've been working on a project called the Gasifier Experimenters Kit(GEK)

It's a well designed gasifier in kit form that allows easy adjustments and access to the gasifier to make changes and experiment pretty well as the name implies.

Quote

The Gasifier Experimenters Kit (GEK) offers beginners through experts an easy way build, compare and customize a wide variety of gasifier reactor types and configurations. Whether you're a DIY enthusiast or a university researcher, the GEK will get you over the starting hurdles of biomass gasification, and on to the more rewarding work of refining specific architectures, testing fuels, and making power.

GEK Link

I've been impressed with Jim's openess with his knowledge, ideas and experiences and he's made gasification a lot more accessible to schools and researchers that want to study gasification without having to build a gasifier.

Quote

We're also getting a lot of participation from
researchers, with GEKs now in at least five universities around the
world, including: Lambton College, Ontario; University of Alaska;
Aston University, Birmingham, England; University of California,
Merced; Maharashtra Institute of Technology, India.

SwampDonkey · « **Reply #381 on:** March 20, 2009, 03:55:31 pm »

That's great stuff Paul.

Fla._Deadheader · « **Reply #382 on:** March 20, 2009, 05:13:16 pm »

Who'ad a thunk it

Burning wood gas in Kalifornicatia

I used to subscribe to the woodgas yahoo group, but, recently dropped it, because of too many e-mails in the inbox.

jpgreen · « **Reply #383 on:** March 21, 2009, 09:58:30 am »

Thanks for the update Paul ..

I'm setting up a machine shop here at the homestead and learning machining to add to my bag of tricks. Woodgas is next on the list. I've been wanting to give Jim a visit in Berkely. Drove through twice in the past few months, but didn't have time to stop.

Kalifornication has good wood I'll have you know ...

Paul_H · « **Reply #384 on:** March 21, 2009, 10:41:23 am »

Hi Pat,

good to see you posting,you've been fairly quiet but I knew you were busy.

Ron57 · « **Reply #385 on:** April 01, 2009, 12:06:38 am »

I finally got the gasifier on the truck and got some pics posted in my photo gallery. I hope they turned out ok. The gasifier is not hooked to the carb yet that is my next project as soon as it is running my childrens school wants me to bring it up and give a demonstration of wood gas power its going to be interesting.
Ron L.

Paul_H · « **Reply #386 on:** April 01, 2009, 01:21:30 am »

Fantastic! What a great looking woodgas truck

Is your cooler,liquid cooled?

SwampDonkey · « **Reply #387 on:** April 01, 2009, 05:37:50 am »

That's great Ron. What ya get for mileage?

Paul_H · « **Reply #388 on:** April 01, 2009, 11:24:09 am »

A PTO wood chunker built by Wayne Keith.It's a short video of some 9 seconds that dial up users may be able to easily watch.

Ron57 · « **Reply #389 on:** April 01, 2009, 02:07:13 pm »

Thanks ; Paul have you tried to run chips of any kind they had a discussion on yahoo about the void between fuel pieces being 15 to20% I measured what I was using and it was almost 35% Interesting.

Paul_H · « **Reply #390 on:** April 01, 2009, 02:23:25 pm »

Ron,

I haven't used chips at all,the blocks are working well but there is some sawdust a.d smaller pieces that mix in with the chucks.My monorator plugged up this year on the side closest to the cab and what I found was when I dump a bag of chunks in the top,the sawdust would screen out into the monorator and block off the condensate from running out so the plan is to begin to screen out the sawdust from the chunks.

How about placing some pics in your post and giving us a description of your system.I really like the styling with the coolers running down the sides of the box.It reminds me of a fire truck.

beenthere · « **Reply #391 on:** April 01, 2009, 02:54:12 pm »

That wood chunker looks pretty smooth.
Been trying to figure out how he holds onto the pieces when they get a bit shorter...

Maybe a chute would work, that would gravity self-feed the pieces.

Paul_H · « **Reply #392 on:** April 01, 2009, 02:56:26 pm »

I was wondering that too.

isawlogs · « **Reply #393 on:** April 01, 2009, 05:14:40 pm »

Maybe he stops at 30 something inches and cuts it in two for the wood stove in da house.

jpgreen · « **Reply #394 on:** April 02, 2009, 10:26:50 am »

Woo hoo on that one Paul ..

Nothing like farm engineering. Now that is a concept that can easily be expanded on without much expense. You could rig up a deck, that used gravity to drop the small diameter stick wood at a good length of your choosing into a shute. Then use a simple hydraulic system to continually push the sticks into that cutter.

Then the cat's meow would be to have a conveyor under to catch the dropped chunks, and send them off to a pile, or truck bed, etc.

I just bought a small conveyor, long enough to load a pickup with firewood for $100 from a surplus dealer. Things like new with an electric motor on a right angle gear dive.

I'm really excited about that cutter there, as it's the best concept I've seen short of a $20,000 Laimet. ...

ellmoe · « **Reply #395 on:** May 25, 2009, 06:25:40 am »

Re: Post number 1 on this thread. On the eoad again, the newly rechristened "Termite".
From Fox News.

'Termite' Truck on Cross-Country Journey Burning Wood Chips for Fuel
Saturday, May 23, 2009

PrintShareThisLEWISTON, Maine — A pickup truck that was modified in Alabama to burn wood chips for fuel is headed to Maine with its new owners behind the wheel of the vehicle they call "Termite."

Auburn, Maine, businessman Ford Reiche and his son George left Birmingham, Ala., on Tuesday. The Lewiston Sun Journal says a device in the bed of the truck roasts chips to form a wood gas, which is cooled, filtered and fed into the engine.

Reiche's blog says the truck has a gasoline-powered backup system.

The truck burns one pound of wood for each mile driven, or about 5,000 miles per cord.

Farmer-inventor Wayne Keith has driven 15,000 miles in the vehicle, including a trip from Alabama to California and back last year. He's working on a new prototype of the vehic

gengaswerner · « **Reply #396 on:** September 22, 2009, 03:25:45 pm »

Hi every one!
Paul!
Hav`nt seen you at woodgasbuilder in a while now! I hope everything is good with you and all!

(I read some old posts about me and Pauls truck hihi! and I can soon say that my hair realy starts to begin to turn gray here and there!!! But I don´t know if it´s age or just the fact that I´m still is in Sweden???)

S-E Werner!

bandmiller2 · « **Reply #397 on:** September 23, 2009, 05:47:16 am »

How much trouble is it to get an inspection sticker if they have to test for emissions??Probibly best to use an older truck exempt from testing.Frank C.

Fla._Deadheader · « **Reply #398 on:** September 23, 2009, 07:58:27 am »

Welcome to the FF, Mr. Werner.

jpgreen · « **Reply #399 on:** September 23, 2009, 10:06:24 am »

Quote from: gengaswerner on September 22, 2009, 03:25:45 pm

Hi every one!
Paul!
Hav`nt seen you at woodgasbuilder in a while now! I hope everything is good with you and all!

(I read some old posts about me and Pauls truck hihi! and I can soon say that my hair realy starts to begin to turn gray here and there!!! But I don´t know if it´s age or just the fact that I´m still is in Sweden???)

S-E Werner!

Welcome SE ...

I love Sweden.Your country has the REAL craftsman,. I've been wanting to build gassers for about 10 years, and finally built a decent shop, and put together a machine shop this year, so hopefully next spring I will start building a unit.

Paul and I both want to build a stationary gasser to power a small engine to drive an auto (Delco) alternator for a backup DC generator. I use the DC to charge my solar system.

News:

Author Topic: Wood burning truck! (Read 80387 times)