Author Topic: Checking the middle of the tree (Read 2422 times)

palmerstreeservice · « **on:** January 30, 2005, 06:56:55 pm »

I have customers frequently ask if the middle of their tree is hollow... As a general rule the trees outer appearance gives me a good clue because they don't call unless they notice a potential problem which generally means its too late.

I have seen what I would call a hand crank drill bits for checking the inner part of the tree, however this looks time consuming.

Can I do the same thing with a long narrow drill bit and then stick a wire in the hole and find out if the middle is soft.

Also no matter which way you go about this is there a specific spot this should be done at and should I put Pruning Sealer on it when finished

Kyle Palmer

Jeff · « **Reply #1 on:** January 30, 2005, 11:03:15 pm »

You can go to forester suppy and look for an increment borer.

Eric_Jensen · « **Reply #2 on:** January 30, 2005, 11:34:41 pm »

Rubber mallets work well for initial inspection. They are easier on the arms

, and also won't break a CODIT barrier on trees not slated for removal.

Texas Ranger · « **Reply #3 on:** January 31, 2005, 10:21:19 am »

Or, you can do the Missouri Butt Pat to determin interior condition. Some what of an art, but the sound varies when the trunk is hit with an object, and you ear is hard up against the stem. Solid stem has a hard sound, hollow, well, a hollow sound.

We are successful most of the time with the butt of a knife, tapping the stem.

palmerstreeservice · « **Reply #4 on:** January 31, 2005, 10:26:28 am »

so if you do actually tap it, can you use just a long deap bit with a cordless drill or will the speed somehow damage the tree, and then do you still seal it?

Larry · « **Reply #5 on:** January 31, 2005, 03:12:45 pm »

I learned that Missouri Butt Pat thing on telephone poles long time ago. Not as easy on trees though. If I found one suspect I would take a cordless drill (fresh battery) with 1/4" electricians bit for proof positive and then plug the hole with a dowel. No idea if this is approved practice or not.

Increment borer things are for checking growth rings and age?? Seemed like they are pretty pricy to as I saw a forester throw a little tantrum when he broke one off in a tree.

Texas Ranger · « **Reply #6 on:** January 31, 2005, 04:09:45 pm »

Increment borers will also get stuck in a hollow tree, and then you have a hollow tree with a spigot.

A drill will work, then you have to probe to see if it is hollow, and on a 20 inch tree or bigger it gets kinda dicey.

Either way, do not plug the hole, the tree will grow over it the first year. 1/4 inch drill at the most, you should feel it when you break into the hollow section.

Hardwoods can be interesting, hollows may have pressure in them, fluids, let me correct that, smelly fluids, that will flush out under pressure when you hit the hollow. Brightens your day .

Missouri butt pat is my way, I smell better at the end of the day.

Larry · « **Reply #7 on:** January 31, 2005, 04:42:30 pm »

Quote from: Texas Ranger on January 31, 2005, 04:09:45 pm

Hardwoods can be interesting, hollows may have pressure in them, fluids, let me correct that, smelly fluids, that will flush out under pressure when you hit the hollow. Brightens your day .

I was helping some guys log a tract that they were behind on one day. I was sorta being a PITA and was carrying on about wanting a big tree to cut. After lunch we went to a new place and the boss said “there is your tree Larry”. Huge black oak...sure wasn’t any worries about it being a leaner. Bored straight in with the 066 fast as I could and this huge geyser of stump water came shooting back out.

Turned around and the boss along with couple other guys were rolling around on the ground laughing.

Decided to be a little bit more reserved the rest of the day.

Thanks for the tip on not plugging the hole Don.

Eric_Jensen · « **Reply #8 on:** January 31, 2005, 10:37:38 pm »

Kyle, I haven' t used an increment borer in years, so had to crack the books.

Pirone's Tree Maintenance page 191 discusses these decay testing tools http://www.fujikura-westbury.co.uk/speciality/products/decay/index.html (hope I'm not breaking any rules posting the link)

Shigo in A New Tree Biology cautions against using increment borers. Page 548 "Studies on the injuries made by increment borers....showed that the wounds caused long columns of discolored and decayed wood. Some holes were plugged with wooden dowels, and others were filled with all types of wound dressings and wound sealants. There is no doubt , the borer wounds do injure trees, and may start cracks.....I do not trust the results obtained from a few cores." Page 555 "Keep increment borers out of trees that are wanted for high quality wood."

Furby · « **Reply #9 on:** February 01, 2005, 12:28:33 am »

Quote from: palmerstreeservice on January 30, 2005, 06:56:55 pm

I have customers frequently ask if the middle of their tree is hollow... As a general rule the trees outer appearance gives me a good clue because they don't call unless they notice a potential problem which generally means its too late.
Kyle Palmer

Sorry, but I guess I'm missing the point. If there are no noticable signs, what does it mater if you are not taking down the tree anyways? Are they going to have you remove the tree just because it's hollow? Trees can live a very long time hollow, and stay standing long after death. Lots of solid healthy trees can be more likely to fall over or break off. Why damage a the tree for really no reason?

Chet · « **Reply #10 on:** February 01, 2005, 01:24:53 am »

Furby, you said what I been thinkin'.

Ron Scott · « **Reply #11 on:** February 01, 2005, 11:00:24 am »

Watch for the wildlife use being made of the tree. Hollow trees make good den, snag, or cavity trees and may have that value if you enjoy viewing wildlife.

Tom · « **Reply #12 on:** February 01, 2005, 03:32:22 pm »

You never know just what kind of strange being you'll find in a tree cavity.

SwampDonkey · « **Reply #13 on:** February 01, 2005, 05:31:50 pm »

I've seen white pine forest stand long after a fire passed by. The new forest grew up around the old white pine stubs that still stand to this day after the new forest has matured. White pine trees take a long time to decay, same as hemlock. I've got a large balsam fir tree behind the house. I'm afraid it will come down soon. It's been dead for 3 years now and rocks away in them wind storms. Fir tends to snap off and doesn't uproot that often unless the site is wet.

palmerstreeservice · « **Reply #14 on:** February 01, 2005, 06:01:52 pm »

I agree by letting it be if there are no tatle tail signs however, (no offense to the older croud) old people freak out about trees. They call all the time just to have them checked and this and that. Always worrying. I look at them tell them they are fine but several people have said, "don't you have a way to check the middle." So I guess that is why I am checking into the boring. I'm not sure but I may be putting my neck on the chop block, if I tell someone the tree looks ok and they request I check the middle, don't and then the wind blows it over on their house, I would guess I am making myself liable for telling them it is ok.

Frickman · « **Reply #15 on:** February 01, 2005, 08:07:46 pm »

PalmersTreeService,

A doctor has alot of different tests, x-Rays, CAT scans, etc. he can do on you to see what is going on in your body, but sometimes he has to open you up to see what is really going on. I figure trees are the same way, you can tell alot by looking at the outside but sometimes might have to open them up to see what's there. I'm not an advocate though of drilling into trees, except to make maple syrup.

You can use your experience and external signs to give your customers an educated guess as to what's inside the tree, and use the above analogy to avoid drilling into the tree. And just like a doctor's patient, that tree can blow down or die at anytime and there's not alot you can do about it. They will have to understand that like a medical doctor, you're not a miracle worker and cannot will a tree to live when it's time has passed.

SwampDonkey · « **Reply #16 on:** February 01, 2005, 08:28:56 pm »

A few years back I was asked to have a look at a couple of Carolina poplar on a lawn. The neighbor was scared the trees where gonna come down on the houses. The trees were 40 plus inches. One tree I inspected had some conk at the butt the other looked sound but had a large crown. I recommended removing them before the wind knocked them down. I know hese trees have been there along time and you wouldn't think they would blow over in the next big storm. But, low and behold a NEaster blew in a couple weeks later and the tree with the conk was broke off at the infection and the tree that was sound was uprooted. Luckily the wind blew those trees away from the buildings and out across the road. It knocked out the power but the houses were spared. I can only imagine what the owner felt after the trees fell over. I wonder how hostile her neighbors where after me being there in their presence to suggest taking them down?

palmerstreeservice · « **Reply #17 on:** February 01, 2005, 10:58:24 pm »

I really like the doctors example I think I will use that. THanks

rebocardo · « **Reply #18 on:** February 02, 2005, 11:35:32 pm »

> I wonder how hostile her neighbors where after me being there in
> their presence to suggest taking them down?

Unless they offered to split the costs I hope they weren't hostile

SwampDonkey · « **Reply #19 on:** February 03, 2005, 06:29:36 am »

As I recall a nieghbor was interested in helping with the cost, but the landowner didn't want to part with her trees so much. Even her own son wanted her to remove the trees.

It's not really the responsibility of the neighbors to share cost removing your trees, but danger trees may make a nieghbor look at things a little different.

News:

Author Topic: Checking the middle of the tree (Read 2422 times)