Well 10 hours on the meter and I dont need any parts! I sawed 275 feet of gnarly cherry logs yesterday to get the hang of it, and I only threw one log and one cant up and over the top of the log supports! ( boy is that a tough one to solve when sawing alone >
Today was 18 foot white pines all day, sawed into 2 by and some 6x6 beams for a new barn. I know there are a lot of tricks to learn, but my whole world of sawing has changed! There is a lot more potential in this hydraulic mill then I had to deal with on my Lucas. So far I am very pleased and the log handling alone was worth the switch
As far as the Logosol...........I hesitate to answer on a big forum like this, but I can share my experience, because it is just that, mine. The bottom line is that the machine was sent back to Baileys and my money was fully refunded ( that is why I upgraded my mill ) After over 2 months of screwing around, the machine simply could not make acceptable hardwood flooring. I was told at purchase time that it could and that it was used in other parts of the world for this, but after many frustrating hours, I was informed otherwise. I dont want to go into a big rant or run down Baileys, the fact that the machine was returned should say enough.
